BOMAG Single Drum Roller BW 145 D-3 / BW 145 DH-3 / BW 145 PDH-3 Operation & Maintenance Manual

This is a complete Operation & Maintenance Manual for the BOMAG Single Drum Roller BW 145 D-3 / BW 145 DH-3 / BW 145 PDH-3.

Serial Numbers:

• S/N 101 581 21.... 901 581 47 ....
• S/N 101 581 22.... 901 581 48 ....
• S/N 101 581 23 .... 901 581 49 ....

Table of Contents:

• Technical Data
• Safety regulations
• Indicators and Controls
• 3.1 General notes
• Operation-
• 4.1 General notes
• 4.2 Tests before taking into operation
• 4.3 Starting the engine
• 4.4 Starting with jump leads
• 4.5 Driving the machine
• 4.6 Emergency exit
• 4.7 Operating the parking brake, stopping the machine
• 4.8 Shutting the engine down
• 4.9 Switching the vibration on and off
• 4.10 Adjusting the seat
• 4.11 Operating the hood
• 4.12 Towing in case of an engine failure
• 4.13 Transport
• Maintenance-
• 5.1 General notes on maintenance
• 5.2 Fuels and lubricants
• 5.3 Table of fuels and lubricants
• 5.4 Running-in instructions
• 5.5 Maintenance chart
• 5.6 Checking the engine oil level
• 5.7 Checking the fuel filter water separator
• 5.8 Checking the fuel level
• 5.9 Checking the hydraulic oil level
• 5.10 Checking the tire pressure
• 5.11 Cleaning the cooling fins on the radiator
• 5.12 Cleaning the cooling fins on the hydraulic oil cooler
• 5.13 Check the oil level in the drive axle
• 5.14 Checking the oil level in left/right wheel hubs
• 5.15 Checking the oil level in the vibration bearings
• 5.16 Servicing the battery
• 5.17 Draining the sludge from the fuel tank
• 5.18 Change engine oil and oil filter cartridge
• 5.19 Checking the V-belt tension, tightening
• 5.20 Checking, adjusting the valve clearance
• 5.21 Changing the oil in the vibration bearings
• 5.22 Change the oil in the drive axle
• 5.23 Change the oil in the wheel hubs
• 5.24 Changing the fuel pre-filter
• 5.25 Changing the fuel filter cartridge
• 5.26 Checking the fastenings on the diesel engine
• 5.27 Tightening the fastening of the axle on the frame
• 5.28 Tightening the wheel nuts
• 5.29 Checking the ROPS
• 5.30 Changing hydraulic oil and breather filter
• 5.31 Changing the hydraulic oil filter
• 5.32 Checking the injection valves
• 5.33 Replacing the toothed belt
• 5.34 Checking, cleaning, changing the combustion air filter
• 5.35 Adjusting the parking brake
• 5.36 Changing the tires
• 5.37 Adjusting the scrapers
• 5.38 Changing the fresh air filter in the cabin
• 5.39 Tightening torques
• 5.40 Engine conservation
• Troubleshooting-
• 6.1 General notes
• 6.2 Engine

Model Specification: BOMAG Single Drum Roller BW 145 D-3 / BW 145 DH-3 / BW 145 PDH-3

Language: English

File Format: .PDF

Total Pages: 92

Requirements: Adobe Reader

Zoom In/Out: Yes

Table: Yes

Compatible: All Versions of Windows & Mac

This manual describes procedures for operation, handling, lubrication, maintenance, checking, and adjustment. It will help the operator and maintenance personnel realize peak performance through effective, economical and safe machine operation and maintenance.

This file is bookmarked and searchable to make what you need easy to find.

All manuals are Windows 7, Vista32 and 64, XP, ME, 98, NT, 2000 compatible and work with Mac!

Instant upon receipt of your payment.

Find it...print it...use it...then trash it.

Tons of pictures and diagrams at your fingertips!!

All pages are printable, so run off what you need & take it with you into the garage or workshop.

Save Money $$ By doing your own repairs! These manuals make it easy for any skill level with these very easy to follow, step-by-step instructions!