Komatsu PC200-5 Pc200LC-5 Mighty Excavator Service Manual

Komatsu PC200-5 Pc200LC-5 Mighty Excavator Workshop Service Manual for Repair.

• SERIAL NUMBERS:
  • PC200-5: 45001 and up. A70001 and up.
  • PC200-5 MIGHTY: 58019 and up.
  • PC2OOLC-5: 45001 and up. A70001 and up.
  • PC2OOLC-5 MIGHTY: 58019 and up.
  • PC220-5: 35001 and up.
  • PC22OLC-5: 35001 and up. A70001 and up.

This Komatsu PC200-5 Pc200LC-5 Mighty Excavator Workshop Service Manual for Repair provides data, characteristics, instructions, and methodology to perform repair interventions on the vehicle and its components.

This manual includes special notes, important points, service data, precautions, etc. that are needed for the maintenance, adjustments, service, removal, and installation of vehicle components for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.

The most detailed, comprehensive step by step procedures, explanations, and pictorial diagrams from bumper to bumper you will ever see for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.

Komatsu PC200-5 Pc200LC-5 Mighty Excavator Service Repair Manual meets all your information needs to repair or make some adjustments to your Komatsu PC200-5 Pc200LC-5 Mighty Excavator. This manual is intended as a handy, easy to read reference book for the mechanics and DIY persons. Comprehensive explanations of all installation, removal, disassembly, assembly, repair, and check procedures are laid out with the individual steps in sequential order.

Detailed illustrations, exploded diagrams, drawings, and photos guide you through every service repair procedure for Komatsu PC200-5 Pc200LC-5 Mighty Excavator Service Repair Manual.

Adjustment and repair operations include reference to Service tool numbers and the associated illustration depicts the tool for Komatsu PC200-5 Pc200LC-5 Mighty Excavator. Where usage is not obvious the tool is shown in use.

This Komatsu PC200-5 Pc200LC-5 Mighty Excavator service manual can be viewed on any computer, as well as zoomed and printed.

This service manual has been specially prepared so that the explanation is very simple. It has been prepared so that if this manual is thoroughly read, even comparatively new personnel can give satisfactory after services to the customers as well as disassemble and maintain the vehicle.

All service and repair instructions included for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.

Always use the correct special service tools or equipment specified. Under no circumstances use makeshift tools or equipment since the use of substitutes may adversely affect safe operation.

Where accurate measurements are required, they can only be made using calibrated, precision instruments.

Providing that the service schedules are respected, the customers can be sure of obtaining the maximum satisfaction and best result from his car. This manual provides general descriptions for accomplishing service and repair work with tested, effective techniques. Following them will help assure reliability.

Information on the construction and function are included. This part should be understood before proceeding with troubleshooting, disassembling and servicing. Information on the troubleshooting, servicing specification lists, tightening torque, checking and adjusting, disassembling and assembling and servicing which cover procedures, precautions, factory specifications and allowable limits.

Information in this manual for Komatsu PC200-5 Pc200LC-5 Mighty Excavator is divided into groups. These groups contain general information, diagnosis, testing, adjustments, removal, installation, disassembly, and assembly procedures for the systems and components. Appropriate service methods and correct repair procedures are essential for the safe, reliable operation of all motor vehicles as well as the personal safety of the individual carrying out the work.

The illustrations in this manual are used to highlight the fundamental principles and procedures of basic interventions. They may not show exactly the Komatsu PC200-5 Pc200LC-5 Mighty Excavator in your possession.

Adjustment and repair operations also include reference to wear limits for Komatsu PC200-5 Pc200LC-5 Mighty Excavator. Relevant data, useful assembly details all in this SERVICE MANUAL for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.

In order to perform the work efficiently and to avoid costly mistakes, read the text and thoroughly familiarize yourself with procedures before starting work.

All work should be performed with great care and in a clean working area with adequate lighting.

Please peruse and utilize this manual for Komatsu PC200-5 Pc200LC-5 Mighty Excavator fully to ensure a complete repair work for satisfying you or your customers by keeping their vehicle in optimum condition.

All information, illustration and specifications contained in this manual are based on the latest product information available at the time of publication approval. The specification, maintenance and other information for the components are included, and diagnostic information has also been added where necessary. These torque values are intended for use in service assembly and installation procedures using the correct OEM fasteners. When replacing fasteners, always use the same type (part number) fastener as removed.

This Komatsu PC200-5 Pc200LC-5 Mighty Excavator book outlines procedures for servicing and repairing vehicles using safe, effective methods. The procedures contain many NOTES, CAUTIONS and WARNINGS which should be followed along with standard safety procedures to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.

To maximize the life of your Komatsu PC200-5 Pc200LC-5 Mighty Excavator:

• Accurately follow the maintenance requirements of the periodic maintenance chart in the service manual.
• Do not allow problems to develop. Investigate unusual noises and changes in the riding characteristics of the Komatsu PC200-5 Pc200LC-5 Mighty Excavator. Rectify all problems as soon as possible (immediately if safety related).
• Use only genuine Komatsu PC200-5 Pc200LC-5 Mighty Excavator parts as listed in the parts catalogue.
• Follow the procedures in this manual carefully and completely. Do not take short cuts.
• Keep complete records of all maintenance and repairs with dates and any new parts installed.
• Use only approved lubricants, as specified, in the manual of the Komatsu PC200-5 Pc200LC-5 Mighty Excavator.

This manual for Komatsu PC200-5 Pc200LC-5 Mighty Excavator has been issued to provide you with technical information regarding the design, function, disassembly, adjusting work and troubleshooting on the components and model of the Komatsu PC200-5 Pc200LC-5 Mighty Excavator.

The descriptions are brief but precise and are supported by photographs, notes, drawings and schematics, as well as exploded and sectional drawings. All this information is intended to simplify any necessary repair work which can be performed on Komatsu PC200-5 Pc200LC-5 Mighty Excavator.

This manual also contains information about adjusting work and valuable reference data for such adjustment values.

For all maintenance and repair work on Komatsu PC200-5 Pc200LC-5 Mighty Excavator, all accident prevention guidelines must be strictly observed. To perform all repairs listed in this manual, a complete set of standard tools, as well as the special tools and fixtures shown and listed are necessary.

No special emphasis is put on replacing sealing components as we assume that these items are replaced during any repair. Unless specific values are given, all threaded connections should be tightened according to the required tightening torques listed on torque charts.

When describing work, which can be dangerous, we have described the required safety measures in this manual and indicated them by special remarks DANGER, CAUTION or NOTE.

This Komatsu PC200-5 Pc200LC-5 Mighty Excavator Service Service Repair Manual QUALITY manual is 100 percents COMPLETE and INTACT, no MISSING/CORRUPT pages/sections to freak you out!

This Komatsu PC200-5 Pc200LC-5 Mighty Excavator Service manual is known in many names:

• Komatsu PC200-5 Pc200LC-5 Mighty Excavator Service service manual.
• Komatsu PC200-5 Pc200LC-5 Mighty Excavator Service repair manual.
• Komatsu PC200-5 Pc200LC-5 Mighty Excavator Service workshop manual.
• Komatsu PC200-5 Pc200LC-5 Mighty Excavator Service shop manual.

This manual for Komatsu PC200-5 Pc200LC-5 Mighty Excavator is designed primarily for use by trained technicians in a properly equipped workshop. However, it contains enough detail and basic information to make it useful to the owner who desires to perform his own basic maintenance and repair work. The work can only be carried out if the owner has the necessary hand and special service tools to complete the job.

A basic knowledge of mechanics, including the proper use of tools and workshop procedures is necessary in order to carry out maintenance and repair work, satisfactorily.

Komatsu PC200-5 Pc200LC-5 Mighty Excavator Service Manual for Workshop Repair.

GENERAL TAGS FOR TRACTORS / ESCAVATORS / BULLDOZER:

• ENGINE for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• ENGINE BODY for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• CYLINDER BLOCK for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• HALF-FLOATING HEAD COVER for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• CYLINDER HEAD for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• CENTER DIRECT INJECTION SYSTEM (E-CDIS) for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• PISTON for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• LUBRICATING SYSTEM for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• OIL COOLER for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• COOLING SYSTEM for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• THERMOSTAT for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• FUEL SYSTEM for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• INJECTION PUMP for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• INDUCTION SYSTEM for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• WATER PUMP for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• INTAKE SYSTEM for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• TRAVELING CLUTCH for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• HYDRAULIC SHUTTLE for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• SYNCHRO SHUTTLE for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• CLUTCH for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• POWER TRAIN for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• HYDRAULIC SHUTTLE VALVE for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• MAIN GEAR SHIFT SECTION for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• TRANSMISSION for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• LUBRICATION FOR TRANSMISSION for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• REAR AXLE for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• FRONT AXLE for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• TRAVELING BRAKE for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• MASTER CYLINDER ASSEMBLY for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• PARKING BRAKE for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• STEERING MECHANISM for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• STEERING CYLINDER for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• HYDRAULIC SYSTEM for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• HYDRAULIC CIRCUIT for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• HYDRAULIC BLOCK for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• HYDRAULIC CYLINDER for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• ELECTRICAL CIRCUIT for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• ROPS MODEL for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• CABIN MODEL for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• UNDERCARRIAGE AND FRAME for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• STARTING MOTOR for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• ALTERNATOR for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• RADIATOR for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• HYDROSHIFT TRANSMISSION for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• BLADE for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• HYDRAULIC CONTROL VALVE for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• HYDRAULIC PUMP for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• TRACK FRAME for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• BODY for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• FRAMEWORK for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• STARTING SYSTEM for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• SYSTEM OUTLINE AND ELECTRICAL CIRCUIT for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• LIGHTING SYSTEM for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• AIR CONDITIONING SYSTEM for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.
• WIRING DIAGRAM for Komatsu PC200-5 Pc200LC-5 Mighty Excavator.

AND MORE...

Komatsu PC200-5 Pc200LC-5 Mighty Excavator Service Manual for Workshop Repair.