Kyocera ECOSYS P7035cdn, Service Manual

This Service Manual is for the Kyocera ECOSYS P7035cdn model. The manual includes detailed diagrams, pictures, and procedures for diagnosing and repairing your copier.

You can easily print, zoom, or read any diagram, picture, or page from this manual. Each chapter is fully detailed and covers all the simulation codes, trouble codes, maintenance procedures, reset procedures, and diagnostic procedures for the Kyocera ECOSYS P7035cdn photocopier.

To see what is included, please refer to the table of contents:

• 1-1 SPECIFICATIONS
  • 1-1-1 Specifications
  • 1-1-2 Parts names
    • Overall
    • Operation panel
  • 1-1-3 Machine cross section
• 1-2 INSTALLATION
  • 1-2-1 Installation environment
  • 1-2-2 Unpacking
    • Unpacking
    • Removing the tape, installation guide, stoppers, panel sheet, and upper inner pad assembly
  • 1-2-3 Installing the expansion memory modules (option)
  • 1-2-4 Installing the SD card (option)
  • 1-2-5 Installing the SSD disk
• 1-3 MAINTENANCE MODE
  • 1-3-1 Maintenance mode
    • Executing a maintenance item
    • Service mode
    • Printing an event log (EVENT LOG)
• 1-4 TROUBLESHOOTING
  • 1-4-1 Paper misfeed detection
    • Paper misfeed indication
    • Paper misfeed detection condition
  • 1-4-2 Self-diagnostic function
    • Self-diagnostic function
    • Self-diagnostic codes
  • 1-4-3 Image formation problems
    • No image appears (entirely white)
    • No image appears (entirely black)
    • A specific color is printed solid
    • The back side gets dirty
    • Image is too light
    • The background is colored
    • White streaks are printed vertically
    • Black streaks are printed vertically
    • Streaks are printed horizontally
    • Spots are printed
    • The leading edge of the image begins to print too early or too late
    • Paper is wrinkled
    • Offset occurs
    • Part of the image is missing
    • Fusing is loose
    • Colors are printed offset to each other
  • 1-4-4 Electric problems
  • 1-4-5 Mechanical problems
• 1-5 ASSEMBLY AND DISASSEMBLY
  • 1-5-1 Precautions for assembly and disassembly
    • Precautions
    • Drum
    • Toner container
      • How to tell a genuine Kyocera toner container
  • 1-5-2 Outer covers
    • Detaching and refitting the left rear cover, left upper cover, and left front cover
    • Detaching and refitting the right rear cover, right upper cover, and right front cover
  • 1-5-3 Paper feed section
    • Detaching and refitting the paper feed roller assembly (paper feed roller and pickup roller)
    • Detaching and refitting the retard roller
    • Detaching and refitting the MP paper feed roller
  • 1-5-4 Developing section
    • Detaching and refitting the developing unit
  • 1-5-5 Drum section
    • Detaching and refitting the drum unit
    • Detaching and refitting the main charger unit
  • 1-5-6 Transfer/separation section
    • Detaching and refitting the intermediate transfer unit
    • Detaching and refitting the transfer roller unit
    • Detaching and refitting the duplex unit B
  • 1-5-7 Fuser section
    • Detaching and refitting the fuser unit
  • 1-5-8 PWBs
    • Detaching and refitting the power source PWB
    • Detaching and refitting the main PWB
    • Detaching and refitting the engine PWB
    • Detaching and refitting the high voltage PWB 1
    • Detaching and refitting the high voltage PWB 2
  • 1-5-9 Others
    • Detaching and refitting the laser scanner unit
    • Direction of installing the principal fan motors
• 1-6 FIRMWARE
  • 1-6-1 Upgrading firmware
    • Firmware file
    • Upgrading the firmware from the USB memory
    • Upgrading the firmware from the SD card
• 2-1 Mechanical Construction
  • 2-1-1 Paper feed/conveying section
    • Cassette paper feed section
    • MP tray paper feed section
    • Paper conveying section
  • 2-1-2 Drum section
    • Drum section
    • Main charger unit
  • 2-1-3 Expose section
    • Laser scanner unit
  • 2-1-4 Developing section
  • 2-1-5 Transfer/separation section
  • 2-1-6 Fuser section
  • 2-1-7 Paper exit/feed shift section
  • 2-1-8 Duplex/conveying section
• 2-2 Electrical Parts Layout
  • 2-2-1 Electrical parts layout
    • PWBs
    • Switches and sensors
    • Other electrical components
• 2-3 Operation of the PWBs
  • 2-3-1 Power source PWB
  • 2-3-2 Engine PWB
  • 2-3-3 Paper exit PWB
• 2-4 Appendixes
  • 2-4-1 Appendixes
    • Wiring diagram
    • Repetitive defects gauge
    • Maintenance Kit

Number of pages: 182