Linde Order Picker Type 149 Explosion Protected: N20L Ex, N20LI Ex Operating Instructions (User Manual)
Secure transaction
Description
Product Reviews
Q&A
These original factory manuals for Linde Order Picker Type 149 Explosion Protected contain high-quality images, circuit diagrams, and instructions to assist with the operation and repair of the covered models: N20L Ex and N20LI Ex. The manuals are available in English and consist of 67 pages.
Foreword
Approved applications
Technical note
Pallet truck takeover
Description
Type plates
Technical data
Technical description
Drive
Lifting
Steering
Braking
Operation
Temperature monitor
General view of truck
Operating and display elements
Multifunctional display
Adjusting the contrast
Adjusting the lighting
Adjusting the date/time
Composite instrument for gas warning system
Hour meter
Battery discharge indicator
Technical description
Gas warning system
Beginning operation
Safety rules
Experts
Report of Thorough Examination
Accident prevention check
Explosion protection check
Operation of industrial trucks in the plant area
Handling fluids and lubricants
Running-in instructions
Maintenance work prior to initial start-up
Daily inspections
Daily checks and servicing before operation
Check FORW/BACK and lift/lower controls
Check electrical steering
Check braking
Checking operation of the emergency isolator button
Check the horn
Check the battery charge
Charging the battery
Opening battery cover
Disconnecting the battery connector
Connecting the battery connector
Recharging the battery with an external charger
Closing battery cover
Check the battery condition, electrolyte level, and specific gravity
Battery change
Battery change with a hoist
Operation
Driving
Approved use
Starting up
Directions of travel identification
Forward travel
Reverse travel
Reversing the direction of travel
Operating the emergency isolator button
Starting on a slope
Steering
Steering direction in forward travel
Braking, lifting, lowering, horn
Regenerative brake
LBC brake
Electro-hydraulic braking
Raising the mast
Lowering the mast
Lifting the fork
Lowering of the fork
Operating the horn
Before loading
Loading
Transporting the load
Depositing the load
Before leaving the truck
Stand-by function of truck
Hoisting, blocking up, towing
Hoisting the truck with a crane
Blocking up the pallet truck
Towing
Transporting the truck
Taking the truck out of operation
Measures before taking the truck out of operation
Putting the truck back into operation
Maintenance
General information
Inspection and maintenance after the first 50 hours of operation
Inspection and maintenance chart
Inspection and maintenance as required
Cleaning the truck
Opening the motor compartment cover
Checking the tightness of wheel fasteners
Checking the wheels for damage and foreign objects
Fixing and adjusting the stabilizer wheel
Checking the fuses
Removing the platform surface covering
Cleaning the dead man's zone on the platform
Checking the condition of battery connector, terminals, and cables
Servicing/cleaning the battery and battery compartment
Checking the battery tray
Inspecting the gas warning system measuring head
Inspecting and calibrating the gas warning system (by an expert)
Cleaning the gas warning system measuring head
Checking the pump motor brushes, replacing the motor if necessary
Adjust the lift chain length, lubricate the lift chain with chain spray
500-hour inspection and maintenance
Greasing the turntable bearing of the motor unit
Cleaning of steering ring and pinions
Checking reduction gear oil level
Checking hydraulic oil level
Checking tightness of hydraulic circuit
Checking condition and fixing of electrical cables and connections
Cleaning and checking wear of contacts
Checking and, if necessary, replacing traction motor brushes
Checking and, if necessary replacing the steering motor brushes
Check the brushes of the lifting hydraulics pump motor and replace, if necessary
Check the brushes of the initial lift pump motor and replace, if necessary
Adjusting the electro-hydraulic brake
Adjust the lift chain length, lubricate the lift chain with chain spray
Checking the various hinges
Checking/adjusting the battery cover catch
1000-hour inspection and maintenance
Cleaning the non-return valve hydraulic oil filter
