Linde Pallet Truck Type 035 (ex 375): L10AC, L12AC, L16AC Service Training (Workshop) Manual

Get your hands on the Original Illustrated Factory Service Training (Workshop) Manual for Linde Pallet Truck Type 035. This manual is a comprehensive resource for both professional mechanics and DIY enthusiasts. It contains high-quality images, circuit diagrams, and detailed instructions to assist you in the operation and repair of your truck.

The manual covers the following models:

• L10AC
• L12AC
• L16AC

Specifications:

• Format: 56 Pages
• Language: English

Contents:

• 6 Electrical Equipment
  • 6.1 Presentation of the CURTIS 1207A controller
    • 6.1.1 Description of the CURTIS controller
    • 6.1.2 Pallet truck operation
    • 6.1.3 Operating principle
      • 6.1.3.1 Forward movement
      • 6.1.3.2 Reverse movement
      • 6.1.3.3 Free wheel circuit
      • 6.1.3.4 Counter current braking
    • 6.1.4 Electrical components
    • 6.1.5 Power unit connections
      • 6.1.5.1 Pin connections 1X1
    • 6.1.6 Switching on the pallet truck
    • 6.1.7 Contactor power supply
    • 6.1.8 Selecting a direction
    • 6.1.9 Accelerator
    • 6.1.10 Driver safety microswitch 1S3
    • 6.1.11 Traction speed reduction option
    • 6.1.12 Electric brake control
    • 6.1.13 Temperature sensors
    • 6.1.14 Line contactor (option)
  • 6.2 Diagnostics
    • 6.2.1 Starting up the software
    • 6.2.2 Main window
    • 6.2.3 Opening page
    • 6.2.4 Programming menu
    • 6.2.5 Saving parameters
    • 6.2.6 Test menu
    • 6.2.7 Diagnostic menu
    • 6.2.8 Diagnostic without computer
    • 6.2.9 Electrical diagram
    • 6.2.10 Pin Connections connector 1X1
  • 6.3 Electrical steering LPS-2
    • 6.3.1 Connector 3X1 pin connections
    • 6.3.2 Connector 3X2 pin connections
    • 6.3.3 Switch on steering
    • 6.3.4 Activating the steering
    • 6.3.5 Calibration resistance
    • 6.3.6 Adjusting the electrical steering
    • 6.3.7 Steering faults
      • 6.3.7.1 General
      • 6.3.7.2 Test points on the control board
      • 6.3.7.3 Specification
      • 6.3.7.4 What to do when ...