Shangli Forklift Operation & Service Manual 1 to 3 ton

This manual provides comprehensive instructions for the main parts and maintenance services of 1-3T forklifts. It covers various aspects including transportation, safekeeping, preparation before use, operation, operating cautions, and maintenance of the forklift.

• Transportation of forklift
• Safekeeping of forklift
• Preparation before using
• Operation of the forklift
• Operating Cautions
• The oil of lift fork
• Lubrication system picture
• Main technical parameter of forklift
• Structure, principle, adjustment, and maintenance of forklift
• Power system
• General description of generator
• Installation of gasoline machine and the proceeding
• Check and adjustment of the generator
• The fuel system
• The accelerator pedal
• Electric gas system
• Summaries
• The Brief operation introduction
• Separators
• Summary
• Maintenance
• The mechanic transmission equipment
• Summary
• The hydraulic transmission mechanism
• Summary
• The torque converter
• The hydraulic clutch
• Control valve, flowing valve, and mini-valve
• Transmission case shell
• The oil pump
• The hydraulic oil path
• Drawing the damaged forklift
• The linking position and oil pressure. And oil temperature survey
• The drive axle
• Summary
• The installation procedure of wheel hub
• Steering system
• Summary
• Arbitral
• The inspection after reassembling the steering system
• Steering axle
• Introduction
• Steering knuckle and main steering pin
• Hub
• Steering cylinder
• Rear wheel bearing pre-load adjustment
• Braking system
• Summary
• Maintenance of wheel brake
• Hydraulic system
• General description
• Main pump
• Control valve and flowing valve
• Hydraulic oil circuit
• Operation of the multi-control valve
• Lifting cylinder
• Flow Regulator Valve
• Tilt Cylinder
• The hydraulic oil tank
• Maintenance of the main oil pump
• The testing
• Troubleshooting
• Lifting system
• General Description
• Inner and outer Masts
• The fork shelf
• The position of the roller
• Maintenance

This manual is essential for both professional mechanics and DIY enthusiasts seeking in-depth knowledge of forklift maintenance and repair.