Konica Minolta Bizhub C224, Bizhub C284, Bizhub C364 Service Manual & Parts List

Service Manual KONICA MINOLTA Bizhub C224, C284, C364;
This service manual, is the full KONICA MINOLTA Bizhub C224, C284, C364 Service Repair Manual.
This manual, KONICA MINOLTA Bizhub C224, C284, C364, is in the format and have detailed Diagrams, pictures and full procedures to diagnose and repair your KONICA MINOLTA Bizhub C224, C284, C364 copier.
You can print, zoom or read any diagram, picture or page from this Service Manual. Every chapter on this manual is fully detailed and contain all the simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of KONICA MINOLTA Bizhub C224, C284, C364 photocopier. You can find easily everything what do you need.
To see what contain, please read table of contents:

A: SAFETY AND IMPORTANT WARNING ITEMS
1. IMPORTANT NOTICE
2. DESCRIPTION ITEMS FOR DANGER, WARNING AND CAUTION
2.1 Description items in this Service Manual
2.2 Description items for safety and important warning items
3. SAFETY WARNINGS
3.1 MODIFICATIONS NOT AUTHORIZED BY KONICA MINOLTA BUSINESS TECHNOLOGIES, INC
3.1.1 Actions requiring special attention
3.2 POWER PLUG SELECTION
3.2.1 Power Cord Set or Power Plug
3.3 CHECKPOINTS WHEN PERFORMING ON-SITE SERVICE
3.3.1 Power Supply
3.3.2 Installation Requirements
3.3.3 After Service
3.4 FUSE
3.5 Used Batteries Precautions
3.5.1 ALL Areas
3.5.2 Germany
3.5.3 France
3.5.4 Denmark
3.5.5 Finland, Sweden
3.5.6 Norway
3.6 Laser Safety
3.6.1 Laser Safety
3.6.2 Internal Laser Radiation
3.6.3 Laser Safety Label
3.6.4 Laser Caution Label
3.6.5 PRECAUTIONS FOR HANDLING THE LASER EQUIPMENT
4. WARNING INDICATIONS ON THE MACHINE
4.1 Warning indications inside the machine
4.2 Warning indications on the boards
5. MEASURES TO TAKE IN CASE OF AN ACCIDENT

C: PRODUCT SPECIFICATIONS
1. Bizhub C364/C284/C224
1.1 Type
1.2 Functions
1.3 Paper
1.4 Materials
1.4.1 Conditions for defining the life value for the field standard yield
1.5 Print volume
1.6 Machine specifications
1.7 Operating environment
1.8 Print functions
1.9 Scan functions
1.10 Note for the Specifications
2. DF-624
2.1 Type
2.2 Functions
2.3 Paper
2.4 Particular originals
2.5 Prohibited originals
2.6 Mixed original feed chart
2.7 Machine specifications
2.8 Operating environment
2.9 Note for the Specifications
3. DF-701
3.1 Type
3.2 Functions
3.3 Paper
3.4 Particular originals
3.5 Prohibited originals
3.6 Mixed original feed chart
3.7 Machine specifications
3.8 Operating environment
3.9 Note for the Specifications
4. PC-210/PC-110
4.1 Type
4.2 Paper
4.3 Machine specifications
4.4 Operating environment
4.5 Note for the Specifications
5. PC-410
5.1 Type
5.2 Paper
5.3 Machine specifications
5.4 Operating environment
5.5 Note for the Specifications
6. JS-506
6.1 Type
6.2 Functions
6.3 Paper
6.4 Offset function
6.5 Machine specifications
6.6 Operating environment
6.7 NOTE
7. FS-533
7.1 Type
7.2 Functions
7.3 Paper process ability
7.3.1 Non sort/sort/group
7.3.2 Sort offset/group offset
7.3.3 Sort staple
7.4 Machine specifications
7.5 Operating environment
7.6 Note for the Specifications
8. PK-519.
8.1 Type
8.2 Functions
8.3 Paper
8.4 Machine specifications
8.5 Operating environment
8.6 Note for the Specifications
9. FS-534
9.1 Type
9.2 Functions
9.3 Paper process ability
9.3.1 Non sort/sort/group
9.3.2 Sort offset/group offset
9.3.3 Sort staple
9.4 Machine specifications
9.5 Operating environment
9.6 Note for the Specifications
10. PK-520
10.1 Type
10.2 Functions
10.3 Paper
10.4 Machine specifications
10.5 Operating environment
10.6 Note for the Specifications
11. SD-511
11.1 Type
11.2 Paper
11.2.1 Saddle stitching/folding
11.2.2 Tri-folding
11.3 Machine specifications
11.4 Operating environment
11.5 Consumables
11.6 Note for the Specifications
12. i-Option LK-101 v3/102 v2/104 v3/105 v3/106/107/108
12.1 Available function for i-Option
12.1.1 List of advanced functions
12.1.2 Types of advanced functions
12.1.3 Activation procedures of i-Option
12.2 Web browser function
13. FK-511.
13.1 Basic specifications
13.1.1 General specifications
13.1.2 Scanning section
13.1.3 Recording section
13.1.4 Line connecting section
13.1.5 Operation panel
13.2 Functional specifications
13.2.1 Dial functions
13.2.2 Transmission
13.2.3 Polling
13.2.4 Line seizure mode and telephone function
13.2.5 Message reception and record
13.2.6 Memory function
13.2.7 Various communication function
13.2.8 User lists / reports
13.2.9 Other user functions
13.3 Network fax specifications
13.3.1 Internet fax
13.3.2 IP address fax

D: OVERALL COMPOSITION
1. SYSTEM CONFIGURATION
1.1 System front view
1.2 System rear view
2. SECTION CONFIGURATION
3. PAPER PATH
4. CONTROL BLOCK DIAGRAM
5. IMAGE CREATION PROCESS
6. IMAGE FORMING CONTROL

E: SERVICE TOOL
1. Bizhub C364/C284/C224
1.1 Service material list
1.2 CE tool list
1.3 Utility tool
1.3.1 IC card information setting tool of AU-201/AU-202H/SCL-010 card reader
2. DF-701/DF-624
2.1 CE tool list

F: PERIODICAL MAINTENANCE
1. Concept of periodical maintenance
2. Periodical maintenance items
2.1 Bizhub C364/C284/C224
2.1.1 Bizhub C364
2.1.2 Bizhub C284
2.1.3 Bizhub C224
2.2 Option
2.2.1 DF-701
2.2.2 DF-624
2.2.3 PC-110/PC-410
2.2.4 PC-210
2.2.5 FS-534
2.2.6 SD-511
2.2.7 FS-533
3. Periodical replacement parts list
3.1 Bizhub C364/C284/C224
3.2 Option
3.2.1 DF-701
3.2.2 DF-624
3.2.3 PC-110
3.2.4 PC-210
3.2.5 PC-410
3.2.6 FS-534
3.2.7 SD-511
3.2.8 FS-533
4. Periodical cleaning parts list
4.1 Main unit
4.2 DF-701
4.3 DF-624
4.4 FS-534
4.5 SD-511
4.6 FS-533
5. Concept of parts life
5.1 Life value of consumables and parts
5.1.1 Specified conditions of field standard yield
5.2 Details of the life specifications
5.3 Control causing inhibited printing for one part when an inhibited-printing event occurs in another part
5.3.1 Target parts
5.3.2 Threshold value
6. Periodical maintenance procedure bizhub C364/C284/C224
6.1 Housing section
6.1.1 Replacing the ozone filter
6.2 Photo conductor section
6.2.1 Replacing the drum unit
6.3 Charging section
6.3.1 Cleaning of the charger wire
6.4 Developing section
6.4.1 Replacing the developing unit
6.5 Toner supply section
6.5.1 Replacing the toner cartridge
6.6 1st transfer section
6.6.1 Cleaning of the image transfer entrance guide
6.6.2 Cleaning of the IDC sensor window
6.6.3 Replacing the transfer belt unit
6.7 2nd transfer/separation section
6.7.1 Replacing the transfer roller unit
6.8 Toner collection section
6.8.1 Replacing the waste toner box
6.8.2 Cleaning of the area around the waste toner collecting port
6.9 Paper feed section
6.9.1 Replacing the tray 1 feed roller, tray 1 pick-up roller, tray 1 separation roller
6.9.2 Replacing the tray 2 feed roller, tray 2 pick-up roller, tray 2 separation roller
6.9.3 Replacing the manual bypass tray feed roller
6.9.4 Replacing the manual bypass tray separation roller assy
6.10 Registration section
6.10.1 Cleaning of the registration roller
6.11 Fusing section
6.11.1 Replacing the fusing unit
6.12 Duplex section
6.12.1 Cleaning of the duplex transport rollers
7. Periodical maintenance procedure DF-701
7.1 Take-up section
7.1.1 Cleaning of the pick-up roller/feed roller
7.1.2 Cleaning of the separation roller
7.1.3 Replacing the pick-up roller/feed roller
7.1.4 Replacing the separation roller assy
7.2 Transport section
7.2.1 Cleaning of the miscellaneous rolls
7.2.2 Cleaning of the miscellaneous rollers
7.3 Scanning section
7.3.1 Cleaning of the front side scanning guide
7.3.2 Cleaning of the reflective sensor section
8. Periodical maintenance procedure DF-624
8.1 Take-up section
8.1.1 Cleaning of the pick-up roller/feed roller
8.1.2 Cleaning of the separation roller
8.1.3 Replacing the pick-up roller/feed roller
8.1.4 Replacing the separation roller assy
8.2 Transport section
8.2.1 Cleaning of the miscellaneous rolls
8.2.2 Cleaning of the miscellaneous rollers
8.3 Scanning section
8.3.1 Cleaning of the scanning guide
8.3.2 Cleaning of the reflective sensor section
9. Periodical maintenance procedure PC-110/PC-210.
9.1 Paper feed section
9.1.1 Replacing the tray 3 feed roller, tray 3 pick-up roller, tray 3 separation roller
9.1.2 Replacing the tray 4 feed roller, tray 4 pick-up roller, tray 4 separation roller
10. Periodical maintenance procedure PC-410
10.1 Paper feed section
10.1.1 Replacing the feed roller, pick-up roller, separation roller
11. Periodical maintenance procedure FS-534
11.1 Paper exit section
11.1.1 Cleaning procedure for each rollers/each rolls
11.1.2 Cleaning the paddles
11.1.3 Replacing the paddle units
12. Periodical maintenance procedure SD-511
12.1 Paper exit section
12.1.1 Cleaning procedure for each rollers/each rolls
12.1.2 Cleaning the upper paddle
12.1.3 Cleaning the lower paddle
12.1.4 Replacing the upper paddle assy
12.1.5 Replacing the lower paddle unit
13. Periodical maintenance procedure FS-533
13.1 Paper exit section
13.1.1 Cleaning procedure for each parts
13.1.2 Cleaning the paper exit paddle
13.2 Alignment section
13.2.1 Replacing the alignment roller assy F/R

G: DISASSEMBLY/REASSEMBLY
1. Disassembly/adjustment prohibited items
1.1 Paint-locked screws
1.2 Red-painted screws
1.3 Variable resistors on board
1.4 Removal/installing of PWBs
1.5 Warnings for disassembly
1.6 Warnings / Precautions during setup or transportation
2. Units from which removing is prohibited
2.1 CCD board
2.1.1 Reason for prohibition
2.2 PH unit
2.2.1 Reason for prohibition
2.3 Fusing unit
2.3.1 Reason for prohibition
3. Disassembly/assembly warning/caution items
3.1 Removal/installing of PWBs
3.2 Use a special screw
4. Notes when transporting the machine
4.1 Protective materials
4.1.1 Protective materials for the photo conductors
4.1.2 Scanner packing bracket
5. Bizhub C364/C284/C224
5.1 Disassembly/reassembly parts list
5.1.1 Exterior parts
5.1.2 Units
5.1.3 Boards
5.1.4 Motors
5.1.5 Clutches
5.1.6 etc
5.2 Disassembly/reassembly procedure (Exterior parts)
5.2.1 Scanner rear cover
5.2.2 Scanner right cover
5.2.3 Scanner front cover
5.2.4 Scanner left cover
5.2.5 Scanner upper rear cover
5.2.6 Control panel left cover/1
5.2.7 Control panel left cover/2
5.2.8 Control panel right cover
5.2.9 Control panel upper cover
5.2.10 Control panel front cover
5.2.11 Control panel lower cover
5.2.12 Control panel unit
5.2.13 Original glass
5.2.14 Front door
5.2.15 Lower front cover
5.2.16 Front cover
5.2.17 Left cover
5.2.18 Exit tray
5.2.19 Rear right cover
5.2.20 Upper right cover
5.2.21 Lower rear cover/1
5.2.22 Lower rear cover/2
5.2.23 Upper rear cover
5.2.24 Tray 1
5.2.25 Tray 2
5.3 Disassembly/reassembly procedure (Units)
5.3.1 LED exposure unit
5.3.2 Paper feed unit
5.3.3 PH unit
5.3.4 Sub hopper unit
5.3.5 Right door unit
5.3.6 Manual bypass tray unit
5.3.7 Regist unit
5.3.8 Hard disk
5.3.9 How to open the PWB box
5.3.10 Main drive unit
5.3.11 Transport unit
5.3.12 Fusing drive unit
5.3.13 Hopper drive unit
5.4 Disassembly/reassembly procedure (Boards)
5.4.1 CCD board (CCDB)
5.4.2 Scanner drive board (SCDB)
5.4.3 Machine condition monitor board (MCMB)
5.4.4 USB board (USBB)
5.4.5 Front side board (FRB)
5.4.6 DC power supply (DCPU)
5.4.7 PH relay board (PHRYB)
5.4.8 Printer control board (PRCB)
5.4.9 SSD board (SSDB)
5.4.10 Memory board/1 (MEMB/1)
5.4.11 MFP board (MFPB)
5.4.12 High voltage unit (HV)
5.4.13 ERP board (ERPB)
5.4.14 Tray 1 FD paper size board (FDPSB/1), tray 2 FD paper size board (FDPSB/2)
5.4.15 Tray 1 CD paper size board (CDPSB/1), tray 2 CD paper size board (CDPSB/2)
5.4.16 Tray 1 empty indicator board (PEIB/1), tray 2 empty indicator board (PEIB/2)
5.5 Disassembly/reassembly procedure (Motors)
5.5.1 Scanner motor (M201)
5.5.2 ADU transport motor (M5)
5.5.3 Toner bottle motor (M10)
5.5.4 Toner supply motor/C (M7)
5.5.5 Toner supply motor/M (M8)
5.5.6 Toner supply motor/Y (M9)
5.5.7 Toner supply motor/K (M6)
5.5.8 Transport motor (M1)
5.5.9 PC motor (M2)
5.5.10 Developing motor (M21)
5.5.11 Fusing motor (M3)
5.5.12 Fusing pressure motor (M11)
5.5.13 Switchback motor (M4)
5.5.14 Tray 1 lift-up motor (M12)
5.5.15 Tray 2 lift-up motor (M13)
5.6 Disassembly/reassembly procedure (Clutches)
5.6.1 Tray 1 paper feed clutch (CL3)
5.6.2 Tray 2 vertical transport clutch (CL2)
5.6.3 Tray 2 paper feed clutch (CL1)
5.6.4 Bypass paper feed clutch (CL7)
5.6.5 ADU transport clutch (CL6)
5.6.6 Registration clutch (CL4)
5.6.7 1st transfer pressure clutch (CL5)
5.6.8 Paper exit clutch (CL8)
5.7 Disassembly/reassembly procedure (etc.)
5.7.1 IDC sensor shutter solenoid (SD2)
5.7.2 Gate switch solenoid (SD3)
5.7.3 Developing solenoid (SD4)
5.7.4 Bypass pick-up solenoid (SD1)
5.7.5 Bypass CD paper size VR (VR1)
6. Option
6.1 Disassembly/reassembly parts list
6.1.1 DF-701
6.1.2 DF-624
6.1.3 PC-110/PC-210
6.1.4 PC-410
6.1.5 JS-506
6.1.6 FS-534
6.1.7 PK-520
6.1.8 SD-511
6.1.9 FS-533
6.1.10 PK-519
6.1.11 FK-511
6.2 Disassembly/reassembly procedure (DF-701/SP-501)
6.2.1 Front cover (DF-701)
6.2.2 Rear cover (DF-701)
6.2.3 Dual scan document feeder (DF-701)
6.2.4 Front side glass cleaning roller unit (DF-701)
6.2.5 Back side glass cleaning roller unit (DF-701)
6.2.6 CIS module (CIS) (DF-701)
6.2.7 DF control board (DFCB) (DF-701)
6.2.8 Document width sensor (VR1) (DF-701)
6.2.9 CIS power supply (CISPU) (DF-701)
6.2.10 Dual scan image processing board (DSIPB) (DF-701)
6.2.11 Document reading motor (M1) (DF-701)
6.2.12 Document feed motor (M2) (DF-701)
6.2.13 Registration motor (M3) (DF-701)
6.2.14 Reading roller release motor (M4) (DF-701)
6.2.15 CIS cleaning motor (M5) (DF-701)
6.2.16 Document reading glass cleaning motor (M6) (DF-701)
6.2.17 DF cooling fan motor (FM1) (DF-701)
6.2.18 Stamp unit (SP-501)
6.2.19 Stamp (SP-501)
6.3 Disassembly/reassembly procedure (DF-624/SP-501)
6.3.1 Front cover (DF-624)
6.3.2 Rear cover (DF-624)
6.3.3 Reverse automatic document feeder (DF-624)
6.3.4 Glass cleaning roller unit (DF-624)
6.3.5 DF control board (DFCB) (DF-624)
6.3.6 Document width size sensor (VR1) (DF-624)
6.3.7 Document reading motor (M1) (DF-624)
6.3.8 Document feed motor (M2) (DF-624)
6.3.9 Registration motor (M3) (DF-624)
6.3.10 Glass cleaning motor (M4) (DF-624)
6.3.11 Reading roll release motor (M5) (DF-624)
6.3.12 DF cooling fan motor (FM1) (DF-624)
6.3.13 Document exit roller release solenoid (SD1) (DF-624)
6.3.14 Stamp unit (SP-501)
6.3.15 Stamp (SP-501)
6.4 Disassembly/reassembly procedure (PC-110/PC-210)
6.4.1 Right door (PC-110/PC-210)
6.4.2 Rear right cover (PC-110/PC-210)
6.4.3 Rear cover (PC-110/PC-210)
6.4.4 Tray 3, tray 4, storage box (PC-110/PC-210)
6.4.5 Paper feed cabinet (PC-110/PC-210)
6.4.6 Tray 3 paper feed unit (PC-110/PC-210)
6.4.7 Tray 4 paper feed unit (PC-210)
6.4.8 PC control board (PCCB) (PC-110/PC-210)
6.4.9 Tray 3 paper empty indicator board (PEIB/3), tray 4 paper empty indicator board (PEIB/4) (PC-110/PC-210)
6.4.10 Tray 3 FD paper size board (FDPSB/3), tray 4 FD paper size board (FDPSB/4) (PC-110/PC-210)
6.4.11 Tray 3 CD paper size board (CDPSB/3) (PC-110/PC-210)
6.4.12 Tray 4 CD paper size board (CDPSB/4) (PC-210)
6.4.13 Tray 3 paper feed motor (M111), tray 4 paper feed motor (M121) (PC-110/PC-210)
6.4.14 Tray 3 vertical transport motor (M112), tray 4 vertical transport motor (M122) (PC-110/PC-210)
6.4.15 Tray 3 lift-up motor (M113), tray 4 lift-up motor (M123) (PC-110/PC-210)
6.5 Disassembly/reassembly procedure (PC-410)
6.5.1 Right door (PC-410)
6.5.2 Rear right cover (PC-410)
6.5.3 Rear cover (PC-410)
6.5.4 Paper feed tray (PC-410)
6.5.5 Paper feed cabinet (PC-410)
6.5.6 Paper feed unit (PC-410)
6.5.7 PC control board (PCCB) (PC-410)
6.5.8 Tray 3 paper empty indicator board (PEIB/3) (PC-410)
6.5.9 Paper feed motor (M131) (PC-410)
6.5.10 Vertical transport motor (M132) (PC-410)
6.5.11 Elevator motor (M134) (PC-410)
6.5.12 Shifter motor (M133) (PC-410)
6.5.13 Wire (PC-410)
6.6 Disassembly/reassembly procedure (JS-506)
6.6.1 Exit tray 1 (JS-506)
6.6.2 Exit tray 2 (JS-506)
6.6.3 Job separator (JS-506)
6.6.4 Sensor unit (JS-506)
6.6.5 JS control board (JSCB) (JS-506)
6.6.6 Tray shift motor (M1) (JS-506)
6.7 Disassembly/reassembly procedure (FS-534)
6.7.1 Rear cover (FS-534)
6.7.2 Front door (FS-534)
6.7.3 Front upper cover (FS-534)
6.7.4 Finisher (FS-534)
6.7.5 Horizontal transport unit (FS-534)
6.7.6 Stapler unit (FS-534)
6.7.7 Sensor unit (FS-534)
6.7.8 FS control board (FSCB) (FS-534)
6.7.9 RU transport motor (M1) (FS-534)
6.7.10 FNS entry transport motor (M2) (FS-534)
6.7.11 FNS discharge motor (M3) (FS-534)
6.7.12 Receving roller retraction motor (M4) (FS-534)
6.7.13 FNS paddle motor (M5) (FS-534)
6.7.14 Trailing edge stopper motor (M6) (FS-534)
6.7.15 Alignment motor/front (M7) (FS-534)
6.7.16 Alignment motor/rear (M8) (FS-534)
6.7.17 Pre-eject drive motor (M9) (FS-534)
6.7.18 Bundle eject motor (M10) (FS-534)
6.7.19 Main tray up/down motor (M11) (FS-534)
6.7.20 Paper receiving control motor (M12) (FS-534)
6.7.21 Side stapler movement motor (M13) (FS-534)
6.8 Disassembly/reassembly procedure (PK-520)
6.8.1 Punch kit (PK-520)
6.9 Disassembly/reassembly procedure (SD-511)
6.9.1 Front cover (SD-511)
6.9.2 Saddle unit (SD-511)
6.9.3 Paper exit tray (SD-511)
6.9.4 Staple unit (SD-511)
6.9.5 SD drive board (SDDB) (SD-511)
6.9.6 SD transport motor (M1) (SD-511)
6.9.7 Paper discharge control motor (M2) (SD-511)
6.9.8 Alignment motor (M3) (SD-511)
6.9.9 Stopper drive motor (M4) (SD-511)
6.9.10 Center fold roller motor (M5) (SD-511)
6.9.11 Tri-folding guide motor (M6) (SD-511)
6.9.12 SD paddle motor (M7) (SD-511)
6.9.13 Center fold guide motor (M8) (SD-511)
6.9.14 Center fold knife motor (M9) (SD-511)
6.9.15 Stopper solenoid (SD1) (SD-511)
6.10 Disassembly/reassembly procedure (FS-533)
6.10.1 Front cover (FS-533)
6.10.2 Upper cover (FS-533)
6.10.3 Rear cover (FS-533)
6.10.4 Finisher (FS-533)
6.10.5 Stapler unit (FS-533)
6.10.6 Paper exit tray unit (FS-533)
6.10.7 FS control board (FSCB) (FS-533)
6.10.8 Stapler relay board (STREYB) (FS-533)
6.10.9 Paper conveyance motor (M101) (FS-533)
6.10.10 Paper exit motor (M102) (FS-533)
6.10.11 Alignment roller motor (M103) (FS-533)
6.10.12 Exit roller lift up motor (M104) (FS-533)
6.10.13 Alignment motor/F (M105), Alignment motor/R (M106) (FS-533)
6.10.14 Stapler movement motor (M107) (FS-533)
6.10.15 Tray lift up motor (M109) (FS-533)
6.10.16 Paper surface detect solenoid (SD101) (FS-533)
6.10.17 Batch solenoid (SD102) (FS-533)
6.10.18 Paper exit roller solenoid (SD103) (FS-533)
6.10.19 Paper exit paddle (FS-533)
6.11 Disassembly/reassembly procedure (PK-519)
6.11.1 Punch kit (PK-519)
6.11.2 PK control board (PKCB) (PK-519)
6.11.3 Punch motor (M201) (PK-519)
6.12 Disassembly/reassembly procedure (FK-511)
6.12.1 FAX kit (line 1), FAX kit (line 2) (FK-511)
7. COMMERCIALLY AVAILABLE PARTS
7.1 Installing the key counter
7.1.1 Configuration
7.1.2 Procedure
7.2 Installing the original size detection sensor/2 (PS205)
7.2.1 Procedure

H: CLEANING/LUBRICATION
1. Bizhub C364/C284/C224
1.1 Cleaning parts list
1.2 Lubrication parts list
1.3 Cleaning procedure
1.3.1 Transfer belt unit
1.3.2 PH window
1.3.3 Tray 1 feed roller, tray 1 pick-up roller, tray 1 separation roller
1.3.4 Tray 2 feed roller, tray 2 pick-up roller, tray 2 separation roller
1.3.5 Tray 2 transport roller
1.3.6 Manual bypass tray feed roller
1.3.7 Manual bypass tray separation roller
1.3.8 Original glass
1.3.9 Scanner rails
1.3.10 Mirrors
1.3.11 Lens
1.3.12 CCD sensor
2. Option
2.1 Cleaning parts list
2.1.1 DF-701
2.1.2 PC-110/PC-210
2.1.3 PC-410
2.2 Cleaning procedure (DF-701)
2.2.1 Back side scanning glass
2.2.2 Back side scanning guide/Back side scanning shading shaft
2.3 Cleaning procedure (PC-110/PC-210)
2.3.1 Tray 3 feed roller, tray 3 pick-up roller, tray 3 separation roller
2.3.2 Tray 4 feed roller, tray 4 pick-up roller, tray 4 separation roller
2.3.3 Tray 3 vertical transport roller, tray 4 vertical transport roller
2.4 Cleaning procedure (PC-410)
2.4.1 Feed roller, Pick-up roller, Separation roller
2.4.2 Vertical transport roller

I: ADJUSTMENT/SETTING
1. HOW TO USE THE ADJUSTMENT/SETTING SECTION
1.1 Outline
1.2 Advance checks
2. Accessibility
2.1 Touch Panel Adjustment
2.1.1 Use
2.1.2 Procedure
2.2 Brightness Adjustment
2.2.1 Procedure
2.3 Key Repeat Start/Interval Time
2.3.1 Time To Start
2.3.2 Interval
2.4 System Auto Reset Confirmation
2.4.1 Use
2.4.2 Default setting
2.4.3 Setting item
2.5 Auto Reset Confirmation
2.5.1 Use
2.5.2 Default setting
2.5.3 Setting item
2.6 Enlarge Display Mode Confirmation
2.6.1 Use
2.6.2 Default setting
2.6.3 Setting item
2.7 Message Display Time
2.7.1 Use
2.7.2 Default setting
2.7.3 Setting item
2.8 Sound Setting
2.8.1 Sound Setting
2.8.2 Operation Confirmation Sound
2.8.3 Successful Completion Sound
2.8.4 Completed Preparation Sound
2.8.5 Caution Sound
2.9 Default Enlarge Display Settings
2.9.1 Use
2.9.2 Procedure
2.10 Double Tap Interval Settings
2.10.1 Procedure
2.11 Voice Guidance Settings
2.11.1 Voice Guidance Settings
2.11.2 Volume
2.11.3 Voice Speed
3. Counter
3.1 Meter Count
3.1.1 Meter Count
3.1.2 Copy
3.1.3 Print
3.1.4 Scan/Fax
3.1.5 Other
3.1.6 Print List
3.1.7 Coverage Rate
3.1.8 Eco Info
3.2 Display Keypad
3.2.1 Use
4. UTILITY
4.1 List of utility mode (outline)
4.2 List of utility mode (detail)
4.2.1 One-Touch/User Box Registration
4.2.2 User Settings
4.2.3 Administrator Settings
4.2.4 Other Settings
4.3 Starting/Exiting
4.3.1 Starting procedure
4.3.2 Exiting procedure
5. UTILITY (ONE-TOUCH/USER BOX REGISTRATION)
One-Touch User Box Registration-Outline
5.1 Create One-Touch destination
5.1.1 Address Book (Public)/(Personal)
5.1.2 Group
5.1.3 E-mail Settings
5.2 Create User Box
5.2.1 Public/Personal User Box
5.2.2 Bulletin Board User Box
5.2.3 Relay User Box
5.3 Limiting Access to Destinations
5.3.1 Apply Levels/Groups to Destinations
6. UTILITY (USER SETTINGS)
6.1 System Settings
6.1.1 Language Selection
6.1.2 Language Selection-Panel Keyboard Language Selection
6.1.3 Language Selection-External Keyboard Language Selection
6.1.4 Select Keyboard
6.1.5 Measurement Unit Settings
6.1.6 Paper Tray Settings
6.1.7 Auto Color Level Adjust
6.1.8 Power supply/power save settings
6.1.9 Output Settings
6.1.10 AE Level Adjustment
6.1.11 Auto Paper Select for Small Original
6.1.12 Blank Page Print Settings
6.1.13 Page Number Print Position
6.1.14 Blank Sheet Detection Level
6.1.15 Separate Scan from Platen
6.2 Custom Display Settings
6.2.1 Copier Settings
6.2.2 Scan/Fax Settings
6.2.3 User Box Settings
6.2.4 Function Display Key (Copy/Print)
6.2.5 Function Display Key (Send/Save)
6.2.6 Copy Screen
6.2.7 Fax Active Screen
6.2.8 Search Option Settings
6.3 Copier Settings
6.3.1 Auto Booklet Selection for Saddle Stitching
6.3.2 Auto Zoom for Combine/Booklet
6.3.3 Booklet Short Cut Mode
6.3.4 Auto Sort/Group Selection
6.3.5 Default Copy Settings
6.3.6 Default Enlarge Display Settings
6.3.7 When AMS Direction is Incorrect
6.3.8 Separate Scan Output Method
6.3.9 Enlargement Rotation
6.3.10 Auto Zoom (Platen)
6.3.11 Auto Zoom (ADF)
6.3.12 Specify Default Tray when APS Off
6.3.13 Select Tray for Insert Sheet
6.3.14 Tri-Fold Print Side
6.3.15 Print Jobs During Copy Operation
6.3.16 Automatic Image Rotation
6.3.17 Finishing Program
6.3.18 Card Shot Settings
6.4 Scan/Fax Settings
6.4.1 JPEG Compression Level
6.4.2 Black Compression Level
6.4.3 TWAIN Lock Time
6.4.4 Default Scan/Fax Settings
6.4.5 Default Enlarge Display Settings
6.4.6 Compact /XPS Compression Level
6.4.7 Color TIFF Type
6.4.8 OCR Operation Setting
6.4.9 Graphic Outlining
6.4.10 Auto Rename Function
6.5 Printer Settings
6.5.1 Basic Settings
6.5.2 Paper Setting
6.5.3 PCL Settings
6.5.4 PS Setting
6.5.5 Security Settings
6.5.6 OOXML Print Settings
6.5.7 Layout - Combination
6.5.8 Print Reports
6.5.9 TIFF Image Paper Setting
6.6 Change Password
6.6.1 Use
6.6.2 Procedure
6.7 Change E-mail Address
6.7.1 Use
6.7.2 Procedure
6.8 Register Authentication Settings
6.8.1 Use
6.9 Synchronize User Auth
6.9.1 Use
6.9.2 Default setting
6.9.3 Setting item
6.10 Cellular Phone/PDA Setting
6.10.1 Link File Error Notification
6.10.2 Proxy Server Use
6.10.3 Print
7. UTILITY (ADMINISTRATOR SETTINGS)
Administrator Settings-Outline
7.1 System Settings-Power Supply/Power Save Settings
7.1.1 Low Power Mode Settings
7.1.2 Sleep Mode Settings
7.1.3 Power Key Setting
7.1.4 Power Save Settings
7.1.5 Enter Power Save Mode
7.1.6 Power Consumption in Sleep Mode
7.1.7 Power Saving Fax/Scan
7.1.8 Awake from Power Save Mode by Touching Control Panel
7.2 System Settings-Output Settings
7.2.1 Print/Fax Output Settings
7.2.2 Output Tray Settings
7.2.3 Shift Output Each Job
7.3 System Settings-Date/Time Settings
7.3.1 Use
7.3.2 Procedure
7.4 System Settings-Daylight Saving Time
7.4.1 Use
7.4.2 Default setting
7.4.3 Setting item
7.5 System Settings-Weekly Timer Settings
7.5.1 Weekly Timer ON/OFF Settings
7.5.2 Time Settings
7.5.3 Date Settings
7.5.4 Select Time for Power Save
7.5.5 Password for Non-Business Hours
7.5.6 Tracking Function Settings
7.5.7 Display ON/OFF Time
7.6 System Settings-Restrict User Access
7.6.1 Copy Program Lock Settings
7.6.2 Delete Saved Copy Program
7.6.3 Restrict Access to Job Settings
7.6.4 Restrict Operation
7.7 System Settings-Expert Adjustment
7.7.1 AE Level Adjustment
7.7.2 Printer Adjustment-Leading Edge Adjustment
7.7.3 Printer Adjustment-Centering
7.7.4 Printer Adjustment-Leading Edge Adjustment: Duplex Side 2
7.7.5 Printer Adjustment-Centering: Duplex 2nd Side
7.7.6 Printer Adjustment-Erase Leading Edge
7.7.7 Printer Adjustment-Vertical Adjustment
7.7.8 Printer Adjustment-Media Adjustment
7.7.9 Finisher Adjustment-Center Staple Position
7.7.10 Finisher Adjustment-Half-Fold Position
7.7.11 Finisher Adjustment-1st Tri-Fold Position Adjustment/2nd Tri-Fold Position Adjustment
7.7.12 Finisher Adjustment-Punch Horizontal Position Adjustment
7.7.13 Finisher Adjustment-Paper Alignment Plate Settings
7.7.14 Finisher Adjustment-Punch Regist Loop Size Adjustment
7.7.15 Density Adjustment
7.7.16 Image Stabilization
7.7.17 Paper Separation Adjustment
7.7.18 Color Registration Adjust
7.7.19 Gradation Adjustment
7.7.20 Scanner Area
7.7.21 Scanner Area-Scanner Adjustment: Leading Edge
7.7.22 Scanner Area-Scanner Adjustment: Centering
7.7.23 Scanner Area-Horizontal Adjustment
7.7.24 Scanner Area-Vertical Adjustment
7.7.25 ADF Adjustment
7.7.26 Line Detection-Prior Detection Setting (Front Side, Back Side)
7.7.27 Line Detection-Feed Cleaning Settings
7.7.28 Trail Edge Adjust
7.7.29 User Paper Settings
7.7.30 Erase Adjustment-Non-Image Area Erase Operation Settings
7.7.31 PS Designer Settings
7.8 System Settings-List/Counter
7.8.1 Management List
7.8.2 Paper Size/Type Counter
7.8.3 Meter Counter List
7.8.4 Check Consumables List
7.8.5 Fax Activity Summary Information
7.8.6 TX Operation Log Output
7.9 System Settings-Reset Settings
7.9.1 System Auto Reset
7.9.2 Auto Reset
7.9.3 Job Reset
7.9.4 Default Basic/Enlarge Display Common Setting
7.10 System Settings-User Box Settings
7.10.1 Delete Unused User Box
7.10.2 Delete Secure Print Documents
7.10.3 Auto Delete Secure Document
7.10.4 Encrypted Delete Time
7.10.5 ID & Print Delete Time
7.10.6 Document Hold Setting
7.10.7 External Memory Function Settings
7.10.8 Allow/Restrict User Box
7.10.9 ID & Print Delete after Print Setting
7.10.10 Document Delete Time Setting
7.11 System Settings-Standard Size Setting
7.11.1 Original Glass Original Size Detect
7.11.2 81/2 x 14/Foolscap Size Detection
7.11.3 Foolscap Size Setting
7.11.4 ADF Size Detection
7.12 System Settings-Stamp Settings
7.12.1 Header/Footer Settings
7.12.2 Fax TX Settings
7.13 System Settings-Blank Page Print Settings
7.13.1 Use
7.13.2 Default setting
7.13.3 Setting item
7.14 System Settings-Registered Key Settings
7.14.1 Use
7.14.2 Procedure
7.15 System Settings-Job Priority Operation Settings
7.15.1 Fax RX Job Priority
7.15.2 Skip Job (Fax)
7.15.3 Skip Job (Copy, Print)
7.16 System Settings-Default Bypass Paper Type Setting
7.16.1 Use
7.16.2 Procedure
7.17 System Settings-Page Number Print Position
7.17.1 Use
7.17.2 Procedure
7.18 System Settings-Preview Settings
7.18.1 Original Direction Confirmation Screen
7.18.2 Realtime Preview
7.18.3 Preview Display Conditions (Standard Application)
7.18.4 Preview Display Conditions (Registered Application)
7.19 System Settings-Enlarge Display Settings
7.19.1 Display Default Setting
7.19.2 Enlarge Display Setting
7.19.3 Apply Basic Setting to Enlarge Display
7.20 System Settings-Scan File Name Settings
7.20.1 Function Mode Initial
7.20.2 Supplementary File Name
7.21 System Settings- Settings
Settings
7.21.1 /A Default Settings
7.21.2 Web Optimization Default Settings
7.21.3 Searchable Settings
7.22 System Settings-Set Paper Name by User
7.22.1 Set Paper Name by User
7.23 System Settings-Custom Display Settings
7.23.1 Main Menu Default Settings
7.23.2 Main Menu Display Settings
7.23.3 Custom Function Pattern Selection
7.23.4 User/Admin Function Permissions
7.23.5 Function Display Key Permission Setting-Copy/Print
7.23.6 Function Display Key Permission Setting-Send/Save
7.23.7 Temporarily Change Language Setting
7.24 Administrator/Machine Settings
7.24.1 Administrator Registration
7.24.2 Input Machine Address
7.25 One-Touch/User Box Registration-Create One-Touch Destination
7.25.1 Address Book (Public)/(Personal)
7.25.2 Group
7.25.3 E-Mail Settings
7.26 One-Touch/User Box Registration-Create User Box
7.26.1 Public/Personal User Box
7.26.2 Bulletin Board User Box
7.26.3 Relay User Box
7.26.4 Annotation User Box
7.27 One-Touch/User Box Registration-One-Touch/User Box Registration List
7.27.1 Address Book List
7.27.2 Group List
7.27.3 Program List
7.27.4 E-Mail Subject/Text List
7.28 One-Touch/User Box Registration-Maximum Number of User Boxes
7.28.1 Use
7.28.2 Procedure
7.29 User Authentication/Account Track-General Settings
7.29.1 User Authentication
7.29.2 Public User Access
7.29.3 Prohibited Function Login Setting
7.29.4 Account Track
7.29.5 Account Track Input Method
7.29.6 Synchronize User Authentication & Account Track
7.29.7 When # of Jobs Reach Maximum
7.29.8 Number of User Counters Assigned
7.29.9 Ticket Hold Time Setting
7.29.10 Scanner Settings
7.29.11 LDAP-IC Card Authentication Setting
7.30 User Authentication/Account Track-User Authentication Settings
7.30.1 Administrative Settings
7.30.2 User Registration
7.30.3 User Counter
7.31 User Authentication/Account Track-Account Track Settings
7.31.1 Account Track Registration
7.31.2 Account Track Counter
7.32 User Authentication/Account Track-Print without Authentication
7.32.1 Use
7.32.2 Default setting
7.32.3 Setting item
7.33 User Authentication/Account Track-Print Counter List
7.33.1 Use
7.33.2 Procedure
7.34 User Authentication/Account Track-External Server Settings
7.34.1 External Server Settings
7.35 User Authentication/Account Track-Limiting Access to Destinations
7.35.1 Create Group
7.35.2 Apply Levels/Groups to Destinations
7.35.3 Apply Levels/Groups to Users
7.36 User Authentication/Account Track-Authentication Device Settings
7.36.1 General Settings
7.36.2 Logoff Settings
7.37 User Authentication/Account Track-User/Account Common Setting
7.37.1 Logout Confirmation Screen Display Setting
7.37.2 Single Color _ 2 Color Output Management
7.37.3 Counter Remote Control
7.38 User Authentication/Account Track-Scan to Home Settings
7.38.1 Use
7.38.2 Default setting
7.38.3 Setting item
7.39 User Authentication/Account Track-Scan to Authorized Folder Settings
7.39.1 Use
7.39.2 Default setting
7.39.3 Setting item
7.40 User Authentication/Account Track-Print Simple Auth
7.40.1 Authentication Setting
7.40.2 Register Authentication Server
7.41 Network Settings-TCP/IP Settings
7.41.1 TCP/IP Settings
7.41.2 IPv4 Settings
7.41.3 IPv6 Settings
7.41.4 DNS Host
7.41.5 DNS Domain
7.41.6 DNS Server Settings (IPv4)
7.41.7 DNS Server Settings (IPv6)
7.41.8 IPsec Settings
7.41.9 IPsec Settings-IPsec Settings-IKEv1 Settings
7.41.10 IPsec Settings-IPsec Settings-IKEv2 Settings
7.41.11 IPsec Settings-IPsec Settings-IPsec SA Settings
7.41.12 IPsec Settings-IPsec Settings-Peer
7.41.13 IPsec Settings-IPsec Settings-Protocol Setting
7.41.14 IPsec Settings-Enable IPsec
7.41.15 IPsec Settings-Communication Check
7.41.16 IP Filtering (Permit Access)
7.41.17 IP Filtering (Deny Access)
7.41.18 RAW Port Number
7.41.19 LLMNR Setting
7.42 Network Settings-NetWare Settings
7.42.1 IPX Settings
7.42.2 NetWare Print Settings
7.42.3 P Server Settings: Print Server Name/Print Server Password
7.42.4 P Server Settings: Polling Interval
7.42.5 P Server Settings: NDS/Bindery Setting
7.42.6 P Server Settings: File Server Name
7.42.7 P Server Settings: NDS Context Name
7.42.8 P Server Settings: NDS Tree Name
7.42.9 Nprinter/Rprinter Settings: Print Server Name
7.42.10 Nprinter/Rprinter Settings: Printer Number
7.42.11 User Authentication Setting (NDS)
7.43 Network Settings-HTTP Server Settings
7.43.1 HTTP Server Settings
7.43.2 PSWC Settings
7.43.3 IPP Settings
7.43.4 Accept IPP jobs
7.43.5 Support Information
7.43.6 Printer Information
7.43.7 IPP Authentication Settings
7.43.8 General Settings
7.43.9 User Name
7.43.10 Password
7.43.11 realm
7.44 Network Settings-FTP Settings
7.44.1 FTP TX Settings
7.44.2 FTP TX Settings: Proxy Server Address
7.44.3 FTP TX Settings: Proxy Server Port Number
7.44.4 FTP TX Settings: Port No
7.44.5 FTP TX Settings: Connection Timeout
7.44.6 FTP Server Settings
7.44.7 FTP Server Settings-Deny Reception Command
7.44.8 FTP Server Settings-PORT Command Enhanced Security
7.45 Network Settings-SMB Settings
SMB Setting
7.45.1 Client Settings
7.45.2 Print Settings
7.45.3 Print Settings: NetBIOS Name
7.45.4 Print Settings: Print Service Name
7.45.5 Print Settings: Workgroup
7.45.6 WINS Settings
7.45.7 WINS Settings: Automatic Retrieval Settings
7.45.8 WINS Settings: WINS Server Address 1, 2
7.45.9 WINS Settings: Node Type Setting
7.45.10 Direct Hosting Setting
7.46 Network Settings-LDAP Settings
7.46.1 Enabling LDAP
7.46.2 Setting Up LDAP
7.46.3 Setting Up LDAP-LDAP Server Name
7.46.4 Setting Up LDAP-Max
7.46.5 Setting Up LDAP-Timeout
7.46.6 Setting Up LDAP-Initial Setting for Search Details
7.46.7 Setting Up LDAP-Change Search Attribute
7.46.8 Setting Up LDAP-Search
7.46.9 Setting Up LDAP-Check Connection
7.46.10 Setting Up LDAP-Reset All Settings
7.46.11 Setting Up LDAP-Server Address
7.46.12 Setting Up LDAP-Search Base
7.46.13 Setting Up LDAP-SSL Setting
7.46.14 Setting Up LDAP-Port Number
7.46.15 Setting Up LDAP-Port Number (SSL)
7.46.16 Setting Up LDAP-Certificate Verification Level Settings
7.46.17 Setting Up LDAP-Authentication Type
7.46.18 Setting Up LDAP-Select Server Authentication Method
7.46.19 Setting Up LDAP-Referral Setting
7.46.20 Setting Up LDAP-Login Name
7.46.21 Setting Up LDAP-Password
7.46.22 Setting Up LDAP-Domain Name
7.46.23 Setting Up LDAP-Search Attributes Authentication
7.46.24 Setting Up LDAP-Search Attribute(s)
7.46.25 Default LDAP Server Setting
7.46.26 Default Search Result Display Setting
7.47 Network Settings-E-Mail Settings-E-Mail TX (SMTP)
7.47.1 E-Mail TX (SMTP)
7.47.2 Scan to E-mail
7.47.3 Status Notification
7.47.4 Total Counter Notification
7.47.5 SMTP Server Address
7.47.6 Binary Division
7.47.7 Divided Mail Size
7.47.8 Connection Timeout
7.47.9 Server Capacity
7.47.10 SSL/TLS Settings
7.47.11 Port No
7.47.12 Port Number (SSL)
7.47.13 Certificate Verification Level Settings
7.47.14 Detail Settings: SMTP Authentication
7.47.15 Detail Settings: POP Before SMTP Authentication
7.47.16 Detail Settings: POP Before SMTP Time
7.48 Network Settings-E-Mail Settings-E-Mail RX (POP)
7.48.1 E-Mail RX (POP)
7.48.2 POP Server Address
7.48.3 Connection Timeout
7.48.4 SSL Setting
7.48.5 Port No
7.48.6 Port Number (SSL)
7.48.7 Certificate Verification Level Settings
7.48.8 Login Name
7.48.9 Password
7.48.10 APOP Authentication
7.48.11 Check for New Messages
7.48.12 Polling Interval
7.49 Network Settings-E-Mail Settings-S/MIME Communication Settings
7.49.1 S/MIME Communication Settings
7.49.2 Signature
7.49.3 E-Mail Text Encryption Method
7.49.4 Print S/MIME Information
7.49.5 Automatically Obtain Certificates
7.49.6 Certificate Verification Level Settings
7.49.7 Signature Type
7.50 Network Settings-SNMP Settings
7.50.1 SNMP Settings
7.50.2 UDP Port Number
7.50.3 SNMP v1/v2c Settings
7.50.4 SNMP v3 Settings
7.50.5 TRAP Setting
7.50.6 TRAP Setting When Authentication failed
7.51 Network Settings-AppleTalk Settings
7.51.1 AppleTalk Settings
7.51.2 Printer Name
7.51.3 Zone Name
7.51.4 Current Zone
7.52 Network Settings-Bonjour Setting
7.52.1 Bonjour Setting
7.52.2 Bonjour Name
7.53 Network Settings-TCP Socket Settings
7.53.1 TCP Socket
7.53.2 TCP Socket (ASCII Mode)
7.54 Network Settings-Network Fax Settings
7.54.1 Network Fax Function Settings
7.54.2 SMTP TX Settings
7.54.3 SMTP RX Settings
7.55 Network Settings-WebDAV Settings-WebDAV Client Settings
7.55.1 WebDAV Client Setting
7.55.2 Proxy Server Address
7.55.3 Proxy Server Port Number
7.55.4 User Name
7.55.5 Password
7.55.6 Chunk Transmission
7.55.7 Connection Timeout
7.55.8 Server Auth
7.55.9 Certificate Verification Level Settings
7.56 Network Settings-WebDAV Settings-WebDAV Server Settings
7.56.1 WebDAV Server Settings
7.56.2 SSL Setting
7.56.3 Password Setting
7.57 Network Settings-WebDAV Settings-Proxy Setting for Remote Access
7.57.1 Proxy Setting for Remote Access
7.58 Network Settings-DPWS Settings-DPWS Common Settings
7.58.1 Friendly Name
7.58.2 Publication Service
7.58.3 Enable SSL
7.58.4 Certificate Verification Level Settings
7.59 Network Settings-DPWS Settings-DPWS Extension Settings DPWS Extension Settings
7.59.1 Enable Proxy
7.59.2 Register Proxy
7.60 Network Settings-DPWS Settings-Printer Settings
7.60.1 Printer Settings
7.60.2 Printer Name
7.60.3 Printer Location
7.60.4 Printer Information
7.61 Network Settings-DPWS Settings-Scanner Settings
7.61.1 Scanner Settings
7.61.2 Scanner Name
7.61.3 Scanner Location
7.61.4 Scanner Information
7.61.5 Connection Timeout
7.62 Network Settings-Distributed Scan Settings
7.62.1 Distributed Scan Settings
7.63 Network Settings-Detail Settings-Device Setting
7.63.1 MAC Address
7.63.2 Network Speed
7.63.3 LLTD Setting
7.64 Network Settings-Detail Settings-Time Adjustment Setting
7.64.1 Time Adjustment Setting
7.64.2 Auto IPv6 Retrieval
7.64.3 NTP Server Setting
7.64.4 Auto Time Adjustment
7.64.5 Polling Interval
7.65 Network Settings-Detail Settings-Status Notification Setting
7.65.1 Register Notification Address (IP Address)
7.65.2 Register Notification Address (IPX Address)
7.65.3 Register Notification Address (E-mail Address)
7.66 Network Settings-Detail Settings-Total Counter Notification Settings
7.66.1 Notification Schedule Setting
7.66.2 Notification Address Setting
7.66.3 Model Name
7.66.4 Send Now
7.67 Network Settings-Detail Settings-PING Confirmation
7.67.1 Use
7.67.2 Procedure
7.68 Network Settings-Detail Settings-SLP Setting
7.68.1 Use
7.68.2 Default setting
7.68.3 Setting item
7.69 Network Settings-Detail Settings-LPD Setting
7.69.1 Use
7.69.2 Default setting
7.69.3 Setting item
7.70 Network Settings-Detail Settings-Prefix/Suffix Setting
7.70.1 ON/OFF Setting
7.70.2 Prefix/Suffix Setting
7.71 Network Settings-Detail Settings-Error Code Display Setting
7.71.1 Use
7.71.2 Default setting
7.71.3 Setting item
7.72 Network Settings-IEEE802.1X Authentication Settings
7.72.1 IEEE802.1X Authentication Settings
7.72.2 Auth
7.72.3 Reset Job Settings
7.72.4 Certificate Verification Level Settings
7.73 Network Settings-Web Browser Setting
7.73.1 Use
7.73.2 Default setting
7.73.3 Setting item
7.74 Network Settings-Bluetooth Setting
7.74.1 Use
7.74.2 Default setting
7.74.3 Setting item
7.75 Network Settings-Single Sign-on Setting Single Sign-on Setting
7.75.1 Domain Login Setting
7.75.2 Applications and Settings
7.75.3 Auto Log Out Time
7.76 Network Settings-IWS Settings
7.76.1 IWS Settings
7.77 Network Settings-Remote Panel Settings Remote Panel Settings
7.77.1 Server Settings
7.77.2 Client Settings
7.78 Network Settings-Internet ISW Settings
7.78.1 Update Firmware at Specified Time
7.78.2 HTTP Server Settings
7.78.3 FTP Server Settings
7.78.4 Firmware Update Parameters
7.79 Copier Settings
7.79.1 Auto Zoom (Platen)
7.79.2 Auto Zoom (ADF)
7.79.3 Specify Default Tray when APS OFF
7.79.4 Print Jobs During Copy Operation
7.79.5 Tri-Fold Print Side
7.79.6 Automatic Image Rotation
7.80 Printer Settings
7.80.1 USB Timeout
7.80.2 Network Timeout
7.80.3 Print XPS/OOXML Errors
7.80.4 Assign Account to Acquire Device Info
7.81 Fax Settings
7.81.1 Header Information
7.81.2 Header/Footer Position
7.81.3 Line Parameter Setting
7.81.4 TX/RX Settings
7.81.5 Function Settings-Function ON/OFF Setting
7.81.6 Function Settings-Memory RX Setting
7.81.7 Function Settings-Closed Network RX
7.81.8 Function Settings-Forward TX Setting
7.81.9 Function Settings-Incomplete TX Hold
7.81.10 Function Settings-PC-Fax Permission Setting
7.81.11 Function Settings-PC-Fax RX Setting
7.81.12 Function Settings-TSI User Box Setting
7.81.13 PBX Connection Setting
7.81.14 Report Settings
7.81.15 Job Settings List
7.81.16 Multi Line Settings-Line Parameter Setting
7.81.17 Multi Line Settings-Function Settings
7.81.18 Multi Line Settings-Multi Line Settings
7.81.19 Multi Line Settings-Sender Fax No
7.81.20 Network Fax Settings-Black Compression Level
7.81.21 Network Fax Settings-Color/Grayscale Multi-Value Compression Method
7.81.22 Network Fax Settings-Internet Fax Self Rx Ability
7.81.23 Network Fax Settings-Internet Fax Advanced Settings
7.81.24 Network Fax Settings-IP Address Fax Operation Settings
7.81.25 Fax Print Quality Settings
7.82 System Connection
7.82.1 OpenAPI Settings-Access Setting
7.82.2 OpenAPI Settings-SSL/Port Settings
7.82.3 OpenAPI Settings-Authentication
7.82.4 OpenAPI Settings-External Application Connection
7.82.5 Call Remote Center
7.82.6 Prefix/Suffix Automatic Setting
7.82.7 Printer Information
7.82.8 Cellular Phone/PDA Setting
7.83 Security Settings-Administrator Password
7.83.1 Use
7.83.2 Procedure
7.84 Security Settings-User Box Administrator Setting
7.84.1 Use
7.84.2 Default setting
7.84.3 Setting item
7.85 Security Settings-Administrator Security Levels
7.85.1 Use
7.85.2 Default setting
7.85.3 Setting item
7.86 Security Settings-Security Details
7.86.1 Password Rules
7.86.2 Prohibited Functions When Authentication Error
7.86.3 Confidential Document Access Method
7.86.4 Manual Destination Input
7.86.5 Print Data Capture
7.86.6 Job Log Settings
7.86.7 Restrict Fax TX
7.86.8 Personal Data Security Settings
7.86.9 Hide Personal Information (MIB)
7.86.10 Display Activity Log
7.86.11 Initialize
7.86.12 Secure Print Only
7.86.13 Copy Guard
7.86.14 Password Copy
7.86.15 Web browser contents access
7.86.16 TX Operation Log
7.86.17 Export Debug Log
7.87 Security Settings-Enhanced Security Mode
7.87.1 Use
7.87.2 Default setting
7.87.3 Setting item
7.88 Security Settings-HDD Settings
7.88.1 Check HDD Capacity
7.88.2 Overwrite HDD Data
7.88.3 Overwrite All Data
7.88.4 HDD Lock Password
7.88.5 Format HDD
7.88.6 HDD Encryption Setting
7.88.7 Debug Log Encryption Settings
7.89 Security Settings-Function Management Settings
7.89.1 Usage Settings for Each Function
7.89.2 Maximum Job Allowance
7.89.3 Network Function Usage Settings
7.90 Security Settings-Stamp Settings
7.90.1 Apply Stamps
7.90.2 Delete Registered Stamp
7.91 Security Settings-Image Log Transfer Settings
7.91.1 Image Log Transfer Settings
7.91.2 Image Log Transfer Settings (Type1)
7.91.3 Image Log Transfer Settings (Type2)
7.92 Security Settings-Driver Password Encryption Setting
7.92.1 Use
7.92.2 Default setting
7.92.3 Setting item
7.93 Security Settings-FIPS Settings
7.93.1 FIPS Settings
7.94 License Settings
7.94.1 Get Request Code
7.94.2 Install License
7.94.3 List of Enabled Functions
7.95 Voice Guidance Settings-Voice Guidance
7.95.1 Use
7.95.2 Default setting
7.95.3 Setting item
7.96 OpenAPI Authentication Management Setting
7.96.1 Restriction Code Settings
7.97 External Memory Backup
7.97.1 Import/Export
7.98 Remote Access Setting
7.98.1 Import/Export User Data
8. UTILITY (OTHER SETTINGS)
8.1 Banner Printing
8.1.1 Use
8.1.2 Procedure
8.2 My Panel Settings
8.2.1 Use
8.2.2 Procedure
8.3 Device Information
8.3.1 Use
8.3.2 Procedure
8.4 Remote Panel Operation
8.4.1 Use
9. ADJUSTMENT ITEM LIST
9.1 Replace feed roller, pick-up roller, separation roller (tray 1, tray 2)
9.2 Replace feed roller, separation roller assy (manual bypass tray)
9.3 Install LCT (Built-in)
9.4 Replace CCD board
9.5 Replace developing unit
9.6 Replace drum unit
9.7 Replace transfer belt unit
9.8 Replace PH unit
9.9 Replace original size detection sensor
9.10 Replace scanner motor
9.11 Replace scanner home sensor
9.12 Replace printer control board
9.13 Replace MFP board
9.14 Replace SSD board
9.15 Replace original glass
9.16 Replace hard disk
9.17 Replace control panel unit
9.18 Replace DF control board (DF-701/DF-624)
9.19 Add key counter
9.20 Execute initialize
9.21 Add an optional device
9.22 Execute F/W update
9.23 Add fax board
9.24 Mount DF-624
9.25 Mount DF-701
9.26 Replace CIS module
10. LIST OF SERVICE MODE
10.1 List of service mode (outline)
10.2 List of service mode (detail)
10.2.1 Machine
10.2.2 Imaging Process Adjustment
10.2.3 CS Remote Care
10.2.4 System 1
10.2.5 System 2
10.2.6 Counter
10.2.7 List Output
10.2.8 State Confirmation
10.2.9 Test Mode
10.2.10 ADF
10.2.11 FAX
10.2.12 Finisher
10.2.13 Internet ISW
11. SERVICE MODE
11.1 Starting/Setting/Exiting
11.1.1 Starting procedure
11.1.2 Setting procedure
11.1.3 Exiting procedure
11.2 Date/Time Input mode
11.2.1 Use
11.2.2 Procedure
11.3 Machine
11.3.1 Trail Edge Color Alignment Adj
11.3.2 Fusing Temperature
11.3.3 Fusing Transport Speed
11.3.4 Heater Control Level
11.3.5 Printer Area
11.3.6 Scan Area
11.3.7 Printer Reg
11.3.8 Color Registration Adjustment
11.3.9 Print Head Skew Adj
11.3.10 LD adjustment
11.3.11 Manual Bypass Tray Width Adj
11.3.12 Lead Edge Erase Adjustment
11.3.13 Non-Image Area Erase Check
11.3.14 ADF Scan Glass Contamination
11.3.15 Exhaust Fan Stop Delay
11.3.16 PPM Control Choice
11.4 Firmware Version
11.4.1 Use
11.4.2 Procedure
11.5 Imaging Process Adjustment
11.5.1 Gradation Adjust
11.5.2 Max Image Density Adj
11.5.3 TCR Level Setting
11.5.4 Image Background Adj
11.5.5 Transfer Voltage Fine Adj
11.5.6 Stabilizer
11.5.7 Thick Paper Density Adjustment
11.5.8 Paper separation adjustment
11.5.9 Manual Toner Add
11.5.10 Monochrome Density Adjustment
11.5.11 Grad/Dev AC Bias V Selection
11.5.12 Removable Voltage Adjust
11.6 CS Remote Care (Outlines)
11.7 Setting up the CS Remote Care
11.7.1 Using the telephone line modem
11.7.2 Using the Fax line modem
11.7.3 Using E-mail
11.7.4 When using a WebDAV server in http communication
11.8 Software SW setting for CS Remote Care
11.8.1 Input procedure
11.8.2 List of software SW for CS Remote Care
11.8.3 SW No 01
11.8.4 SW No 02
11.8.5 SW No 03
11.8.6 SW No 04
11.8.7 SW No 05
11.8.8 SW No 06
11.8.9 SW No 07
11.8.10 SW No 08
11.8.11 SW No 09
11.8.12 SW No 10
11.8.13 SW No 11
11.8.14 SW No 12
11.8.15 SW No 14
11.8.16 SW No 15
11.8.17 SW No 18
11.8.18 SW No 21
11.8.19 SW No 22
11.8.20 SW No 23
11.9 Setup confirmation
11.10 Calling the maintenance
11.10.1 When starting the maintenance
11.10.2 When finishing the maintenance
11.11 Calling the center from the administrator
11.12 Checking the transmission log
11.13 Detail on settings for CS Remote Care
11.13.1 Maintenance/Default Settings - System Selection
11.13.2 Maintenance/Default Settings - ID Code
11.13.3 Maintenance/Default Settings - Detail Setting
11.13.4 Maintenance/Default Settings - Server Setting (E-Mail1 or E-mail2 is selected.)
11.13.5 Maintenance/Default Settings - Server Setting (http1 or http2 is selected)
11.13.6 Product Auth
11.13.7 Import/Export Settings
11.14 System 1
11.14.1 Marketing Area
11.14.2 Tel/Fax Number
11.14.3 Serial Number
11.14.4 Sleep ON/OFF Choice Setting
11.14.5 Foolscap Size Setting
11.14.6 Original Size Detection
11.14.7 Install Date
11.14.8 Initialization-Clear All Data
11.14.9 Initialization-Clear Individual Data
11.14.10 Initialization-System Error Clear
11.14.11 Problem Unit Isolation Set
11.14.12 Post card transfer table
11.14.13 Warm Up
11.14.14 Machine State LED Setting
11.14.15 TP Level
11.15 System 2
11.15.1 HDD
11.15.2 Image Controller Setting
11.15.3 Option Board Status
11.15.4 Consumable Life Reminder
11.15.5 Unit Change
11.15.6 Software Switch Setting
11.15.7 CCD Calibration
11.15.8 LCT (Built-in) Size Settings
11.15.9 LCT Paper Size Setting
11.15.10 Line Mag Setting
11.15.11 Data Capture
11.15.12 ADF Scan Glass Contamin
11.15.13 Stamp
11.15.14 Network Fax Settings
11.15.15 Image Stabilization Setting
11.15.16 User Paper Settings
11.15.17 Coverage Rate Screen
11.15.18 JAM Code Display Setting
11.15.19 BootUp Screen
11.15.20 Install Data
11.15.21 Bluetooth Settings
11.15.22 CIS Image Adjustment
11.15.23 Display Eco Index
11.15.24 Internal Error
11.15.25 Acquiring Settings
11.15.26 Driver Install
11.15.27 IWS Settings
11.15.28 Custom Pattern
11.16 Counter
11.16.1 Common procedure
11.16.2 Life
11.16.3 Service Call
11.16.4 Section Service Call
11.16.5 Warning
11.16.6 Maintenance
11.16.7 Service Total
11.16.8 Counter of Each Mode
11.16.9 Service Call History (Data)
11.16.10 ADF Paper Pages
11.16.11 Paper Jam History
11.16.12 Fax Connection Error
11.16.13 ADF Scan Glass Contamin
11.16.14 Parts Counter (Fixed)
11.16.15 Jam
11.16.16 Section JAM
11.17 List Output
11.17.1 Batch List CSV Output
11.17.2 Machine Management List
11.17.3 Adjustment List
11.17.4 Parameter List
11.17.5 Service Parameter
11.17.6 Protocol Trace
11.17.7 Fax Setting List
11.17.8 Fax Analysis List
11.18 State Confirmation
11.18.1 Sensor Check
11.18.2 Table Number
11.18.3 Level History 1
11.18.4 Level History 2
11.18.5 Temp
11.18.6 CCD Check
11.18.7 Memory/HDD Adj
11.18.8 Memory/HDD State
11.18.9 Color Regist
11.18.10 Load Check
11.18.11 Adjustment Data List
11.19 Test Mode
11.19.1 Procedure for test pattern output
11.19.2 Gradation Pattern
11.19.3 Halftone Pattern
11.19.4 Lattice Pattern
11.19.5 Solid Pattern
11.19.6 Color Sample
11.19.7 8 Color Solid Pattern
11.19.8 CMM Pattern
11.19.9 Paper Passage Test
11.19.10 Fax Test-Signal Send Test
11.19.11 Fax Test-Signal Receive Test
11.19.12 Fax Test-NCU TEST
11.20 ADF
11.20.1 Original Stop Position
11.20.2 Registration Loop Adj
11.20.3 Auto Stop Position Adjustment
11.20.4 Paper Passage
11.20.5 Sensor Check
11.20.6 Original Tray Width
11.20.7 Read Pos Adj
11.20.8 FD-Mag
11.20.9 Scanning Light Adjustment
11.20.10 Mixed original size adjustment
11.20.11 Home Read Position Adjust
11.20.12 FD-Mag
11.20.13 Main Scanning Direction Zoom
11.21 FAX setting (Line1)
11.21.1 Modem/NCU
11.21.2 Network
11.21.3 System
11.21.4 Fax File Format
11.21.5 Communication
11.21.6 List Output
11.21.7 Function Parameter
11.21.8 Initialization
11.22 FAX setting (Line2)
11.22.1 Modem/NCU
11.22.2 Network
11.22.3 Communication
11.22.4 Initialization
11.23 FAX setting (Address parameter list: for main line and sub line)
11.23.1 0b000*
11.23.2 0b001*
11.23.3 0b002*
11.23.4 0b003*
11.23.5 0b004*, 0b005*
11.23.6 0b006*
11.23.7 0e000*
11.23.8 0e001*
11.23.9 0e002*
11.23.10 0e003*
11.23.11 0e004*
11.23.12 0e005*
11.23.13 12000*
11.23.14 13000*
11.23.15 13003*
11.23.16 13004*
11.23.17 13005*
11.23.18 13006*
11.23.19 13007*
11.23.20 13008*
11.24 FAX setting (Address parameter list: for main line)
11.24.1 0e009*
11.24.2 0e00a*
11.24.3 0e00b*
11.24.4 0e00c*
11.24.5 0e00d*
11.24.6 0e00e*
11.24.7 0e00f*
11.24.8 0e010*
11.24.9 0e011*
11.24.10 0f000*
11.24.11 0f001*
11.24.12 10000*
11.24.13 10001*
11.25 FAX setting (Address parameter list: for sub line)
11.25.1 0e01a*
11.25.2 0e01b*
11.25.3 0e01c*
11.25.4 0e01d*
11.25.5 0e01e*
11.25.6 0e01f*
11.25.7 0e020*
11.25.8 0e021*
11.25.9 0e022*
11.25.10 0f002*
11.25.11 0f003*
11.25.12 10002*
11.25.13 10003*
11.26 Finisher
11.26.1 FS-FN adjustment - Center Staple Position
11.26.2 FS-FN adjustment - Half-Fold Position
11.26.3 FS-FN adjustment - 1st Tri-Fold Adjustment/2nd Tri-Fold Adjustment
11.26.4 FS-FN adjustment - Punch Edge Adj
11.26.5 FS-FN adjustment - Punch Regist Loop Size
11.26.6 FS-FN adjustment - Finisher Components Test Mode
11.26.7 FS-FN adjustment - Alignment plate Position
11.26.8 FS-FN adjustment - Paper Alignment Guides W
11.26.9 Punch Option Setting
11.26.10 Max
11.26.11 Job Separator
11.27 Internet ISW
11.27.1 Internet ISW Set
11.27.2 Internet ISW - HTTP Setting
11.27.3 Internet ISW - FTP Setting
11.27.4 Forwarding Access Setting
11.27.5
11.27.6 Update Start Time Settings
12. ENHANCED SECURITY
12.1 List of Enhanced Security
12.2 Starting/Exiting
12.2.1 Starting procedure
12.2.2 Exiting procedure
12.3 Enhanced Security
12.3.1 CE Password
12.3.2 Administrator Password
12.3.3 Administrator Feature Level
12.3.4 CE Authentication
12.3.5 DC/DevC Lifestop
12.3.6 Memory Data Backup
12.3.7 Operation Ban release time
12.3.8 Administrator unlocking
12.3.9 Engine FW DipSW
12.3.10 Engine Data Backup
13. BILLING SETTING
Billing setting
13.1 List of billing setting
13.2 Starting/Exiting
13.2.1 Starting procedure
13.2.2 Exiting procedure
13.3 Billing setting
13.3.1 Counter Setting
13.3.2 Management Function Choice
13.3.3 Management Function Choice - Key Counter IF Vendor
13.3.4 Management Function Choice - Authentication Device 2
13.3.5 Management Function Choice - Key Counter Only
13.3.6 Management Function Choice - Management Device
13.3.7 Management Function Choice - Vendor 2
13.3.8 Setting items that automatically change the setting values
13.3.9 Coverage Rate Clear
13.3.10 License management - Activation
13.3.11 License management - Deactivation
13.3.12 License management - Repair
13.3.13 License management - Initialize
13.3.14 License management - Request Code
13.3.15 License management - List
13.3.16 License management - Function List
13.3.17 OpenAPI Authentication Management
13.3.18 WebDAV Server Setting
14. DEBUG SETTINGS
Debug Settings
14.1 List of debug settings
14.2 Starting/Exiting
14.2.1 Starting procedure
14.2.2 Exiting procedure
14.3 Debug Settings
14.3.1 Debug Log Output
14.3.2 Acquiring Mode
14.3.3 TX Debug Log Settings
14.3.4 USB Password
14.4 Operation of the debug log function
14.4.1 Basic mode
14.4.2 Enhance mode
15. CONTENTS TO BE CLEARED BY RESET FUNCTION
16. MECHANICAL ADJUSTMENT bizhub C364/C284/C224
16.1 Scanner section
16.1.1 Adjustment of the scanner motor belt
16.2 Control panel section
16.2.1 Fixing the control panel
16.2.2 Adjustment of the slide amount
16.3 Paper feed section
16.3.1 Centering adjustment of the tray 1/2
16.3.2 Pick-up pressure adjustment of the tray 1/2
16.3.3 Separator roller pressure adjustment of the bypass tray
16.3.4 Adjustment of the bypass CD paper size VR
16.4 Fusing section
16.4.1 Adjusting the parallelism of the fusing unit path
17. MECHANICAL ADJUSTMENT DF-701
17.1 Original document feed section
17.1.1 Adjusting the height
17.1.2 Adjusting front side skew feed on ADF
17.1.3 Adjusting back side skew feed on ADF
17.1.4 Adjusting the pressure of the separation roller
18. MECHANICAL ADJUSTMENT DF-624
18.1 Original document feed section
18.1.1 Adjustin