Main image
Click to view image in fullscreen
![]()
Linde Diesel Forklift Truck 353-03 Series: H50, H60, H70, H80 Operating Manual (User Manual)
File Type:
PDF
14.22 MB
Description
Product Reviews
Q&A
- Illustrated Factory Operating Manual (User Manual) for Linde Forklift Truck 353-03 Series with Diesel Engines
- Covered models:
- H50 D-03
- H60 D-03
- H70 D-03
- H80 D-03
- H80/900 D-03
- Format: 102 pages
- Language: English
- Table of Contents:
- Foreword
- Authorised applications
- Technical note
- Takeover inspection
- Description
- Type plates
- Technical data
- Noise emission levels
- Frequency characteristic for human body vibrations
- Technical description
- Engine
- Hydraulic system
- Operation
- Lift mast
- Brakes
- Steering
- Electrical system
- General view of truck
- Controls and indicators
- Composite instrument
- Beginning operation
- Safety rules
- Important safety information
- Handling fuels and lubricants
- Accident prevention check
- Operation of industrial trucks in the plant area
- Diesel engine emissions
- Soot particle filter system inspection
- Running-in instructions
- Experts
- Services prior to first operation
- Daily checks
- Daily checks and servicing before operation
- Opening the bonnet
- Closing the bonnet
- Check the fuel level
- Refuelling
- Check the engine oil level
- Check the header tank coolant level
- Check the tyre inflation pressure
- Applying the seat belt
- Opening the seat belt
- Adjusting the operator seat
- Starting the engine
- Cold start
- Stopping the engine
- Malfunctions during operation
- Operation
- Driving
- Driving forward
- Reversing
- Reversing the direction of travel
- Stopping
- Single-pedal model
- Steering
- Brakes
- Service brake
- Parking brake
- Applying the parking brake
- Releasing the parking brake
- Central-lever control of lifting device and attachments
- Tilting the mast forward
- Tilting the mast back
- Lifting the fork carriage
- Lowering the fork carriage
- Operating the attachments
- Operating the sideshift
- Operating the clamp
- Single-lever control of lifting device and attachments
- Installation of additional equipment
- Turning on the lighting
- Turning on the hazard warning light
- Turning on the front working lights
- Turning on the working light (at rear)
- Operating the intermittent front windscreen wiper
- Operating the front windscreen wiper
- Operating the front windscreen washer
- Intermittent switch for rear and top windscreen wiper
- Operating the rear windscreen and top screen wipers
- Operating the rear windscreen and top screen washer
- Operating the directional indicator lights
- Turning on the dome light
- Heater
- Controls
- Fan motor fuse
- Operating the horn
- Truck Data Management
- Truck data acquisition
- Condition code
- Truck data acquisition - default setting (PIN number and condition code)
- Truck data acquisition special setting (PIN number)
- Check fuses, renew if required
- Driving
- Before lifting a load
- Adjusting the fork spread
- Loading
- Transporting a load
- Depositing a load
- Before leaving the lift truck unattended
- Transport
- Transport with lorry or low-bed semi-trailer
- Hoisting the truck
- Hoisting the truck with a crane
- Hoisting the truck with lifting eyes
- Wheel change
- Mast removal
- Securing the moveable overhead guard
- Trailer coupling
- Towing instructions
- Towing
- Towing procedure
- Releasing the disc brake
- Opening the hydraulic by-pass valve
- After towing
- Making the brakes operational again
- Emergency exit for trucks with rear windscreen
- Taking the truck out of operation
- Measures before taking the truck out of operation
- Putting the truck back into operation
- Maintenance
- General information
- Servicing the mast and the front part of the truck
- Securing the mast against tilting back
- Standard mast
- Securing the raised standard mast
- Maintenance after the first 50 service hours
- Inspection and maintenance schedule
- Inspection and maintenance as required
- Cleaning the lift truck
- Cleaning and spraying the mast chain
- Cleaning the air filter
- Cleaning with compressed air
- Emptying the dust bowl in the air filter cover
- Replacing the safety element
- Clean the pre-filter
- Regenerate the soot particulate filter
- Check wheel fastener for tightness
- Check the tyres for damage and foreign objects
- Lubricate the steer axle, mast and tilt cylinder bearings
- Clean the radiator and engine oil, hydraulic oil and fuel cooler, check for leaks
- Clean with compressed air
- Clean with a cold cleaner
- Drain the water separator in the fuel system
- Bleed the fuel system
- Check seat belt for condition and operation
- 500-hour inspection and maintenance
- Clean and lubricate the steer axle
- Grease the mast pivots
- Grease the tilt cylinder and overhead guard pivots
- Check the engine mounting, movable overhead guard, steer axle and drive axle hub differentials for tightness
- Check the forks and fork quick-releases
- Check the mast, lift chains lift cylinders and stops for condition, operation and security
- Adjust the lift chains, lubricate with chain spray
- Check the pre-tension of double hoses if attachments are fitted
- Check and oil other pivots and joints
- Check the engine cooling system for leaks
- Check and oil the pedals, accelerator and engine control linkage
- Renew the engine oil
- Drain the engine oil
- Renew the engine oil filter
- Add engine oil
- Check the hydraulic oil level
- Check the coolant concentration
- Check the soot particle filter system
- Check tension and condition of ribbed V-belt drive for alternator and fan
- Drain the water separator in the fuel system
- Clean the radiator, hydraulic oil and fuel cooler
- Cleaning with compressed air
- Cleaning with cold cleaner
- Renew the drive axle hub differential oil and clean the magnetic plug
- Check the condition and security of electric cables, connectors and cable connections
- Check the condition, electrolyte level and specific gravity of the battery
- 1000-hour inspection and maintenance
- Renew the hydraulic pressure, suction and breather filters
- Renew the pressure filter
- Renew the suction filter
- Renew the breather filter
- Renew the fuel filter cartridge
- Check the engine mounting for condition and tightness
- Renew the ribbed V-belt
- Check the exhaust system for leaks and tightness
- Check the hydraulic system, hydraulic pumps, valves and lines for leaks
- Renew the air filter element, check the vacuum switch
- Check the parking brake
- Check the drive axle hub differential oil level and for leaks
- Check the soot particle filter system
- 2000-hour inspection and maintenance
- Check the soot particle filter system
- Check valve tip clearances
- Renew the safety element