Linde Forklift Truck 316 Series with Cummins Tier 3 Engine: S30, S40, S50, S60 Operating Manual (User manual)

This Original Illustrated Factory Operating Manual (User Manual) is designed for use with the Linde Forklift Truck 316 series, featuring a Cummins Tier 3 engine.

Covered models include:

• S30
• S40
• S50
• S60

With a total of 152 pages, this manual is presented in English.

The manual includes a table of contents with the following sections:

• Introduction
• Your Linde truck
• Technical Description
• Intended use
• Impermissible use
• Symbols used
• Commissioning
• Truck Takeover
• EC declaration of conformity
• Safety
• Safety Rules
• Handling Fuel, Lubricants and Coolant
• Residual risks
• Stability
• Overview
• Description
• General view of Truck
• Type Plates
• Controls and Indicators
• Controls and indicators
• Gauges and Warning lights
• Operation
• Truck access - doors and covers
• Drivers cabin
• Engine access
• Checks and tasks
• Engine oil level check
• Fuel level check
• Coolant level check
• Brake fluid check
• Hydraulic oil level check
• Filling the windscreen washer bottle
• Adjusting the drivers seat
• Tyres check
• Starting and stopping the engine
• Starting - stopping the engine
• Malfunctions
• Malfunctions -engine
• Driving
• Steering
• Operate the horn
• Cab interior light
• Mirrors
• Braking system
• Truck lighting and turn indicators
• Lights, hazard and turn indicators
• Washers and wipers
• Operating the wipers
• Ventilation and heating
• Heater control and ventilation
• Fuses
• Operating the truck
• Before lifting a load
• Lifting a load
• Travelling with load
• Depositing a load
• Control levers
• Before leaving the truck unattended
• Wheel change
• Location for jacks
• Towing
• Optional equipment
• Maintenance
• General remarks
• Hoisting the truck
• Measures before taking the truck out of operation
• Putting the truck back into service
• General information
• Fuel and oil recommendations
• Diesel fuel
• Inspection and maintenance schedule
• As required Service plan
• 50 h Service plan
• 500 h Service plan
• 1000 h Service plan
• 2000 h Service plan
• 2500 h Service plan
• 6000 h Service plan
• Inspection and maintenance data
• Engine
• Engine oil level check
• Engine oil change
• Fuel pre-filter clean
• Fuelfilter_change
• Bleeding the fuel system
• Dust valve -check
• Air filter element -renew
• Renew the safety element
• Coolant level check
• Coolant strength check
• Coolant renew
• Check and clean the radiator and hydraulic oil cooler
• Engine mountings check
• Intake and exhaust system -check
• Drive belt - check
• Valve clearances - check
• Check engine accessories
• Chassis bodywork and fittings
• Clean the truck
• Check seat belt for condition and correct operation*
• Mirrors
• Wheel nuts -tighten
• Drive axle hub oil level check
• Drive axle oil change
• Steer axle - clean and lubricate
• Chassis frame
• Structured components -check
• Controls
• Parking brake -lubricate
• Electrics
• Battery check
• Hydraulics
• Hydraulic oil level check
• Hydraulic oil filters change
• Hydraulic oil -renew
• Load lift system
• Work on the lifting device
• Mast and traverse cylinders - lubrication
• Mast chains -check and adjust
• Lubrication points
• Renewing the lift chains (at least every 6000h, 3 years and when 3 stretch has been attained)
• Troubleshooting
• Troubleshooting guide (Diesel engine)
• Troubleshooting guide (Hydraulic system)
• Annex
• Technical data
• Datasheet
• 316 Datasheet
• Mast variations
• Mast Variations
• Circuit diagrams
• Electrical circuit diagrams
• Electrical Circuit
• Hydraulic circuit diagrams
• Hydraulic circuit diagrams