Linde LPG Forklift Truck 350-03 Series: H12, H16, H18, H20 Operating Manual (User Manual)

This is the operating manual for the Linde Forklift Truck with LPG Engine 350-03 series. It covers the following models:

• H12T-03
• H16T-03
• H18T-03
• H20T-03

The manual is in English and consists of 113 pages. It includes the following sections:

• Foreword
• Approved applications
• Technical note
• Truck takeover
• Description
• Type plates
• Technical data
• Noise emission levels
• Frequency characteristic for human body vibrations
• Technical description
• Engine
• Hydraulic system
• Operation
• LHC control
• Brakes
• Steering
• Electrical system
• General view of truck
• Controls and indicators
• Composite instrument
• Beginning operation
• Safety rules
• Important safety information
• Handling fuels and lubricants
• Accident prevention check
• Operation of industrial trucks in the plant area
• Running-in instructions
• Experts
• Safety instructions for the LPG system
• Checks and services before initial operation
• Daily checks
• Daily pre-operational checks and services
• Opening the bonnet
• Closing the bonnet
• Check the engine oil level
• Checking the LP gas level
• Check the coolant level in recovery tank
• Visual, olfactory inspection of LPG system
• Changing the LPG cylinder
• Filling the LPG tank
• Check the tyre inflation pressure
• Adjusting the operator seat
• Opening the gas cylinder or gas tank shutoff valve
• Operation
• Applying the seat belt
• Opening the seat belt
• Starting the engine
• Stopping the engine
• Closing the gas cylinder or LPG tank shutoff valve
• Malfunctions during operation
• Driving
• Forward travel
• Reverse travel
• Changing the travel direction
• Stopping
• Single-pedal model
• Steering system
• Steering
• Braking system
• Service brake
• Stop pedal
• Parking brake
• Applying the parking brake
• Releasing the parking brake
• Central-lever control of lifting device and attachments
• Tilting the mast forward
• Tilting the mast back
• Lifting the fork carriage
• Lowering the fork carriage
• Operating the attachments
• Operating the sideshift
• Operating the clamp
• Single-lever control of lifting device and attachments
• Installation of additional equipment
• Switching on the front working lights
• Switching on the rear working lights
• Switching on the lights
• Switching on the hazard warning lights
• Turning on the front windscreen wiper
• Turning on the rear windscreen wiper
• Operating the turn indicator lights
• Heater
• Turning on the heater (version 1)
• Fan motor fuse
• Turning on the heater (version 2)
• Operating the horn
• Truck Data Management
• Truck data acquisition
• Condition code
• Truck data acquisition - default setting (PIN number and condition code)
• Truck data acquisition - special setting (PIN number)
• Fuses
• Check fuses, renew if required
• Before lifting a load
• Adjusting the fork spread
• Loading
• Travel with a load
• Unloading
• Parking the truck
• Transport
• Transport with lorry or low-bed semi-trailer
• Hoisting the truck
• Hoisting the truck with a crane
• Hoisting the truck with the eyebolts
• Wheel change
• Catalytic converter, unregulated
• Trailer coupling
• Mast removal
• Towing instructions
• Towing
• Towing procedure
• Release the multiple disc brake
• Open hydraulic pump pressure-relief valves
• After towing
• Reset brake
• Emergency exit for trucks with rear windscreen
• Taking the truck out of operation
• Measures before taking the truck out of operation
• Putting the truck back into operation
• Disposal of old vehicles